Ascent And Venturist series cups, Lids, BLAde BAse And seAL
Use and Care Instructions
1. L
oad your container. DO NOT blend hot liquids in the 20 oz. (0.6 L) cup or
8 oz. (240 ml) bowl.
2. Put a seal on the bottom thread of the blade base. The seal should fit snugly and
evenly around the thread.
3. Thread the blade base onto the cup or bowl in a clockwise direction. Firmly
tighten the blade base onto the cup or bowl BEFORE blending.
4. Put the cup or bowl and blade base onto the blender base.
If the motor base does not recognize the cup or bowl, tighten the blade base
further onto the cup or bowl and place it back on the motor base. If the problem
continues, contact Vitamix Customer Service for support.
5. Blend the recipe according to the instructions in the recipe.
Liquids
DO NOT blend hot liquids!
Dry Goods
Leafy Greens
Fruits & Veggies
Ice & Frozen
Ingredients
WARNING
To Avoid Injury. NEVER TOUCH MOVING PARTS.
Keep hands and utensils out of containers and cups during blender operation. DO NOT insert
fingers or utensils around the blades while the blades are spinning.
The blades will continue to spin until they come to a complete stop at the end of the blend cycle.
Allow the blades to come to a complete stop before handling the blade base and cups.
Firmly tighten the blade base onto the cup or bowl BEFORE blending.
If the cup becomes un-threaded from the blade base during operation, turn the machine OFF and
wait until the motor and blades come to a complete stop before attempting to remove the cup
and blade base from the motor base.
WARNING
DO NOT use your 20 oz. (0.6 L) cup or 8 oz. (240 ml) bowl to heat ingredients or to blend hot liquids. Heated
ingredients and liquids may create internal pressure which could cause the cup to burst and cause injury.
DO NOT continuously use your machine for more than 75 seconds for the 20 oz. (0.6 L) cup or 8 oz. (240 ml) bowl.
If a cup becomes warm to the touch or steams or vents, immediately stop blending ingredients and turn o or unplug
blender. Allow the cup and ingredients to cool to room temperature before removing the blade base.
Parts will become hot with extended use.
DO NOT touch the drive socket in the blender base or the drive spline in the blade base.
To avoid damage or personal injury, DO NOT use the cups (including the blade base or lids) in the microwave.
sy m B o L s
Warning and Caution
NEVER touch moving parts
DO NOT use your 20 oz. (0.6 L) cup or 8 oz. (240 ml) bowl to heat ingredients or to blend hot liquids
Parts will become hot with extended use. DO NOT touch the drive socket in the blender base or the drive spline in
the blade base
To avoid damage or personal injury, DO NOT use the cups (including the blade base or lids) in the microwave
6. If the mixture stops circulating, press the On/O switch to stop the motor. Wait until the blades stop rotating. Remove the
cup and blade base from the blender base. Turn the cup over. Unthread the blade base from the cup. Stir the ingredients.
Add liquid if necessary. Reattach the blade base, place on blender base and continue blending.
7. After blending, wait until the blades completely stop before removing the lid or container/cup from the blender base.
8. If necessary, use a Vitamix Blade Scraper or spatula to remove salsa, jelly, jam, peanut butter, and other thick ingredients from
under the blades only after the blender has been turned o and the container has been removed from the motor base.
BLending
Loading ...
Loading ...
Loading ...