WE8 Instructions for Use
JURA Type 737
K
For your safety: read and understand manual before use.
E
2
Table of contents
Your WE8
IMPORTANT SAFEGUARDS 4
Control elements 8
1 Preparing and using for the first time 10
JURA on the Internet ....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container ...........................................................................................................................10
Determining the water hardness ..............................................................................................................10
First-time use .................................................................................................................................................11
Connecting milk ...........................................................................................................................................14
2 Preparation 15
Latte macchiato, cappuccino and other specialty coffees with milk ..................................................16
Ristretto, espresso and coffee ....................................................................................................................16
Two ristretti, two espressi and two coffees .............................................................................................17
Milk foam .......................................................................................................................................................17
Ground coffee ...............................................................................................................................................17
Permanently setting the amount of water for the cup size .................................................................18
Adjusting the grinder ..................................................................................................................................19
Hot water .......................................................................................................................................................19
3 Daily operation 20
Filling the water tank ..................................................................................................................................20
Switching on the machine .........................................................................................................................20
Daily maintenance ......................................................................................................................................20
Regular maintenance ..................................................................................................................................21
Switching off the machine ..........................................................................................................................21
4 Permanent settings in programming mode 22
Adjusting the product settings .................................................................................................................23
Enable or disable setting of cup volume ................................................................................................24
Enable or disable one-off settings ...........................................................................................................25
Enable and disable products .....................................................................................................................25
Automatic switch-off ..................................................................................................................................26
Milk system rinsing .....................................................................................................................................26
Setting the water hardness ....................................................................................................................... 27
Unit for amount of water ...........................................................................................................................27
Language ......................................................................................................................................................27
Query counter readings and version .......................................................................................................28
5 Maintenance 29
Rinsing the machine ...................................................................................................................................29
Rinsing the milk system .............................................................................................................................30
3
Table of contents
Cleaning the milk system ..........................................................................................................................30
Dismantling and rinsing the fine foam frother.......................................................................................31
Inserting the filter .......................................................................................................................................32
Changing the filter ...................................................................................................................................... 33
Cleaning the machine ................................................................................................................................34
Descaling the machine ..............................................................................................................................35
Cleaning the bean container ..................................................................................................................... 37
Descaling the water tank ........................................................................................................................... 37
6 Display messages 38
7 Troubleshooting 39
8 Transport and environmentally friendly disposal 40
Transport/ Emptying the system .............................................................................................................40
Disposal .........................................................................................................................................................40
9 Technical data 41
10 Index 42
11 JURA contact details/ Legal information 48
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
J CAUTION
CAUTION, used with the safety alert symbol, indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to
perform some action.
E
Information and tips to make it even easier to use your JURA.
‘Coffee’ Display message
J
J DANGER
J WARNING
4
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS.
Pass them on to any subsequent user.
When using electrical appliances, basic safety precautions shall
always be followed, to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
Z Read all instructions.
Z Do not touch hot surfaces. Use handles or knobs.
Z To protect against fire, electric shock and injury to persons, do
not immerse power cord, plugs, or body of machine in water
or other liquid.
Z Close supervision is necessary when any appliance is used by
or near children.
Z Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
Z Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
Z The use of an accessory attachment not recommended by the
appliance manufacturer may result in fire, electric shock, or
injury to persons.
Z Do not use outdoors.
Z Do not let the cord hang over the edge of a table or counter,
or touch hot surfaces.
Z Do not place on or near a hot gas or electric burner, or in a
heated oven.
Z To disconnect, turn any control to ‘OFF’ then remove plug
from wall outlet.
Z Do not use appliance for other than intended use.
Z Use extreme caution when dispensing hot steam, hot water
or hot coffee.
Follow the basic safety
precautions
5
IMPORTANT SAFEGUARDS
This machine is intended for use by specialist or trained staff in
businesses, light industry and agricultural facilities or for
commercial use by non-professionals. It should only be used for
coffee preparation and to heat milk and water. Use for any other
purpose will be deemed improper. JURA Elektroapparate AG cannot
accept any responsibility for the consequences of improper use.
People, including children, who
Z do not have the physical, sensory or mental capabilities to use
the appliance safely or
Z are inexperienced or lack knowledge in how to use the
appliance safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
Z A short power-supply cord is to be provided to reduce risks
resulting from becoming entangled in or tripping over a
longer cord.
Z The cord shall be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children
or tripped over.
Z This appliance has a 3-pin grounded plug.
Z Do not modify the plug in any way.
Extension cords are available an may be used if care is exercised in
their use.
If the user chooses to use an extension cord,
Z the marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance, and
Z if the appliance is of the grounded type, the extension cord
should be a grounding type 3-wire cord, and
Z the longer cord should be arranged so that it will not drape
over the counter top or tabletop where it can be pulled on by
children or tripped over.
To reduce the risk of fire or electric shock, DO NOT remove any
service covers. DO NOT modify the appliance in any way that is not
described in these instructions. NO user serviceable parts included.
Repair MUST be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
Intended use
Special power cord set
instructions
J WARNING
6
IMPORTANT SAFEGUARDS
Any servicing other than cleaning and user maintenance shall be
performed by an authorized service representative:
Z Do not immerse base in water or try to disassemble.
Z Do not put the appliance or any individual parts in the
dishwasher.
Z Check voltage to be sure that the voltage indicated on the
name plate complies with your voltage. The name plate is
located on the underside of the appliance.
Z Never use warm or hot water to fill the water container. Use
cold water only.
Z Keep your hands and the cord away from hot parts of the
appliance during operation.
There is a risk of scalds or burns on the spouts and the cappuccino
frother / nozzle.
Z Keep children away.
Z Do not touch any hot parts. Use the handles or knobs
provided.
Z Ensure that the cappuccino frother / nozzle is correctly fitted
and clean. If incorrectly fitted or if they become blocked, the
cappuccino frother or its parts might come off.
Z Never clean with scouring powders or hard implements.
Z Ensure that the ventilation slots are not covered.
Z Never pull out the drip tray during the brewing process. Only
pull the drip tray when the display instructs you or when the
appliance is ready for use.
J CAUTION
NOTICE
7
IMPORTANT SAFEGUARDS
Z Never fill instant coffee, chocolate mix etc. into the bean
container or ground coffee funnel (filler funnel for ground
coffee). It will damage the functioning of the brewing
chamber.
Z Never fill sugar coated coffee beans into the bean container.
In case of doubt, call your dealer.
Z Never fill anything other than coffee beans into the bean
container (no chocolate, no rice, no nuts, no spices, nothing
other than roasted coffee beans).
Z Never fill frozen beans into the bean container. If you store
beans in the freezer, let them thaw 3 to 4 hours before filling
them into the bean container.
Z Never fill anything but fresh, cold and clean water into the
water tank, except when decalcifying.
Z Never use mineral or carbonated water. You can use tap water,
bottled water, spring water and reverse osmosis water.
Z Never do anything with the machine which is not described in
these instructions. In case of doubt, call your dealer.
NEVER DO
(or you will void your
warranty protection):
8
Control elements
Control elements
13
12
3
4
5
7
6
8
14
9
10
11
1
2
J HOT
J HOT
1 Filler funnel cover
2 Filler funnel for ground coffee
3 Bean container with aroma
preservation cover
4 Water tank cover
5 Water tank
6 Power cord
(back of the machine)
7 Coffee grounds container
8 Drip tray
9 Cover cap for grinder adjustment switch
10 Grinder adjustment switch
11 On/Off button Q
12 Fine foam frother
13 Height-adjustable coffee spout
14 Cup platform
9
Control elements
1
2
1 Display 2 Multi-function buttons (button function depends
on what is shown in the display)
Professional fine foam frother (optional)
Accessories
Container for milk system
cleaning
Measuring spoon for ground
coffee
Hot-water nozzle
é
è
6
10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet (www.jura.com). You will find interesting and
up-to-date information on your JURA and on every aspect of coffee.
When setting up your JURA, please note the following:
U
Place the JURA on a horizontal surface that is not sensitive to
water.
U
Choose a spot for your JURA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean
container.
T Remove the aroma preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur
®
test strips supplied with the
machine.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
JURA on the Internet
Setting up the machine
Filling the bean container
NOTICE
Determining the water
hardness
11
1 Preparing and using for the first time
T You will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
When using the machine for the first time, you can choose whether
you want to operate JURA with or without the CLEARYL Smart filter
cartridge. If the water hardness is 10°dH or more (total hardness),
we recommend using the filter cartridge.
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged.
T Never use a machine which has a defective power cord.
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Precondition:The bean container has been filled.
T Insert the power plug into a power socket.
T Press the On/Off button Q to switch the JURA on.
‘Choose language’
E To display more languages, press the ‘ > ’ button (bottom
right).
First-time use
J WARNING
12
1 Preparing and using for the first time
T Press the button that corresponds to the language you want,
e.g.
‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the
‘<’ or ‘>’ button to change the water hardness
setting, for example to
‘25°dH’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Use filter’
E Now decide whether you want to operate your JURA with or
without a CLEARYL Smart filter cartridge.
Operation with filter cartridge: go straight to the next section (see
Chapter 1 ‘Preparing and using for the first time – First-time use with
filter cartridge activation’).
Operation without filter cartridge (see Chapter 1 ‘Preparing and
using for the first time – First-time use without filter cartridge
activation’).
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Place a receptacle (at least 10 oz or 300ml) under the fine
foam frother and the coffee spout.
T Remove the water tank and rinse it with cold water.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
T Open the filter holder.
First-time use with filter
cartridge activation
CAUTION
13
1 Preparing and using for the first time
T Insert the filter cartridge with its extension into the water
tank.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Use filter’ / ‘Saved’
‘Filter is being rinsed’
, water flows out of the fine foam
frother.
Rinsing of the filter stops automatically after approximately
10 oz (300ml).
‘System is filling’, the system fills up with water.
‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Machine is rinsing’, the system is rinsed.
The rinse stops automatically. Your JURA is ready for use.
E The start screen shows the products you can prepare. Press
the
‘>’ button to display more products.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the
‘No filter’ button.
‘Saved’ appears briefly on the display.
‘Fill water tank’
First-time use without filter
cartridge activation
CAUTION
14
1 Preparing and using for the first time
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling’, the system fills up with water.
‘Machine is heating’
‘Machine is rinsing’
, the system is rinsed.
The rinse stops automatically. Your JURA is ready for use.
E The start screen shows the products you can prepare. Press
the
‘>’ button to display more products.
Your JURA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 39–46 °F (4–8 °C). We would therefore
recommend using a Cool Control Basic milk cooler or a vacuum milk
container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother.
T Connect the other end of the milk pipe to a milk container
or a Cool Control Basic milk cooler.
Connecting milk
15
2 Preparation
2 Preparation
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water
and seek medical attention.
T Keep children AWAY.
E The display shows four products you can prepare. Press the
‘>’ button to display more products.
E You can stop the machine at any time while a specialty coffee
or hot water is being prepared. To do this, press the
‘Cancel’
button.
E During the grinding operation you can select the coffee
strength of single products by pressing the
‘<’ and ‘>’
buttons.
E During preparation you can change the preset amounts
(e.g. water and amount of milk) by pressing the
‘<’ and ‘>’
buttons.
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
Coffee tastes best served hot. A cold porcelain cup cools the
beverage – and impairs the taste. We therefore recommend
prewarming the cups. The full coffee aroma can develop only in
prewarmed cups. You can purchase a JURA cup warmer from your
specialized dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
J WARNING
16
2 Preparation
Your JURA prepares latte macchiato, cappuccino and flat white at the
touch of a button. There is no need to move the glass or cup.
E This chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:Milk is connected to the fine foam frother.
T Place a glass under the fine foam frother.
E If you are using the professional fine foam frother, turn the
setting wheel to the Milk Foam positioné.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’, the preset amount of milk foam flow into
the glass.
E There is a short interval while the hot milk separates from
the milk foam. This allows the typical layers of a latte
macchiato to form. You can choose the length of this interval
in programming mode (see Chapter 4 ‘Permanent settings
in programming mode – Adjusting the product settings’).
Coffee preparation starts. The preset amount of water
for espresso flows into the glass. Preparation stops
automatically. Your JURA is once more ready for use.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the milk system’).
Example:Proceed as follows to prepare one coffee.
T Place a cup under the coffee spout.
T Press the
‘Coffee’ button.
Preparation starts.
‘Coffee’ and the coffee strength are
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
Latte macchiato,
cappuccino and other
specialty coffees with
milk
Ristretto, espresso and
coffee
17
2 Preparation
To prepare two specialty coffees, press the appropriate preparation
button twice (within approximately 1 second).
Example:Proceed as follows to prepare two espressi.
T Place two cups under the coffee spout.
T Press the
‘Espresso’ button twice (within 1 second) to start
preparation.
‘2 espressi’, the preset amount of water flows into the cups.
Preparation stops automatically. Your JURA is once more
ready for use.
Precondition:Milk is connected to the fine foam frother.
T Place a cup under the fine foam frother.
E If you are using the professional fine foam frother, turn the
setting wheel to the Milk Foam positioné.
E If you want to prepare hot milk, turn the setting wheel of the
professional fine foam frother to the Milk position è.
T Press the
‘Milk foam’ button.
‘Milk foam’, the milk foam is prepared. The preset amount
flows into the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the milk system’).
You can choose to use a second coffee variety, for example
decaffeinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee,
‘Not enough ground coffee’ is displayed and
the JURA stops the operation.
Two ristretti, two
espressi and two coffees
Milk foam
Ground coffee
18
2 Preparation
E The desired specialty coffee must be prepared within
approximately one minute after filling with the ground coffee.
Otherwise the JURA stops the operation and is once more
ready for use.
All specialty coffees with ground coffee are always prepared
following the same model.
Example:Proceed as follows to prepare one espresso using ground
coffee.
T Place a cup under the coffee spout.
T Open the powder chute cover.
‘Ground coffee’ / ‘Please add ground coffee’
T Place one level measuring spoon of ground coffee into the
filler funnel.
T Close the cover of the filler funnel.
T Press the
‘Espresso’ button.
Preparation starts.
‘Espresso’, the preset amount of water for
espresso flows into the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
It is easy to permanently adjust the amount of water for all single
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
T Place a cup under the coffee spout.
T Press and hold the
‘Coffee’ button until ‘Enough coffee?
Press button’
appears.
T Release the
‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
T Press any button except
‘Cancel’ as soon as there is sufficient
coffee in the cup.
Preparation stops.
‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
Your JURA is once more ready for use.
E You can alter this setting at any time by repeating the above
procedure.
Permanently setting the
amount of water for the
cup size
19
2 Preparation
E You can also permanently set the amounts for all single
products in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Adjusting the product
settings’).
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not
operating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is
running.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T Place a cup under the coffee spout.
T Open the cover of the grinder adjustment switch.
T Press the
‘Espresso’ button to start preparation.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
T Close the cover of the grinder adjustment switch.
To obtain a perfect water flow, use the hot-water nozzle.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
T Place a cup under the hot-water nozzle.
T Press the
‘Hot water’ button.
‘Hot water’, the preset amount of water flows into the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
Adjusting the grinder
CAUTION
Hot water
J
CAUTION
20
3 Daily operation
3 Daily operation
Daily maintenance of the machine and hygiene when handling
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.
T Place a receptacle under the coffee spout.
T Press the On/Off button Q to switch the JURA on.
‘Welcome to JURA’
‘Machine is rinsing’
, the system is rinsed.The rinse stops
automatically.The start screen is displayed.Your JURA is
ready for use.
To ensure that you get many years of reliable service out of your
JURA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
E Always empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
T Refit the coffee grounds container and the drip tray.
Filling the water tank
NOTICE
Switching on the machine
Daily maintenance
21
3 Daily operation
T Rinse the water tank with clean water.
T Clean the fine foam frother (see Chapter 5 ‘Maintenance –
Cleaning the milk system’).
T Remove the milk pipe and rinse it thoroughly under running
water.
T Dismantle and rinse the fine foam frother (see Chapter 5
‘Maintenance – Dismantling and rinsing the fine foam
frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfiber cloth).
Carry out the following maintenance actions regularly or as
required:
U
In the interests of hygiene, we recommend changing the milk
pipe and interchangeable milk spout on a regular basis
(approximately every 3 months). Replacements are available
from specialized dealers.
U
Clean the inside of the water tank, e.g. with a brush. Further
information about the water tank is provided in these
instructions for use (see Chapter 5 ‘Maintenance – Descaling
the water tank’).
U
Traces of milk and coffee may stick to the top and bottom of
the cup platform. If this happens, clean the cup platform.
When the JURA is switched off, the system is automatically rinsed if
a specialty coffee has been prepared.
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Press the On/Off button Q.
E If milk has been prepared, you will be prompted to clean the
milk system (
‘Clean the milk system’). After 10 seconds the
switch-off process continues automatically.
E If milk has been prepared but you have not started milk
system cleaning, the milk system is rinsed first (
‘Milk system
is being rinsed’
).
‘Machine is rinsing’, the system rinses itself. The operation
stops automatically. Your JURA is switched off.
Regular maintenance
Switching off the
machine
22
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Press the
‘ Pc’ button to enter programming mode. You can
navigate through the program items and permanently save the
required settings using the multi-function buttons. The following
settings can be made:
Program
item
Sub-item Explanation
‘1/6’ ‘Clean’,
‘Descale’,
‘Clean the milk system’,
‘Filter’ (only if filter is
activated)
T Start the required maintenance program here.
‘2/6’ ‘Rinse the milk system’,
‘Rinse the coffee system’,
‘Information’
T Here you can start the required maintenance program
or find out what maintenance actions are required.
‘3/6’ ‘Expert mode’
T Select your settings for specialty coffees and hot water.
‘Customise cup fill
volume’
T Disable the function "Permanently setting the amount
of water for the cup size".
‘One-off settings’
T Specify whether or not to allow one-off settings during
preparation.
‘Lock/enable’
T Enable or disable individual products.
‘4/6’ ‘Choose language’
T Select your language.
‘Units’
T Select the unit for the amount of water.
‘Switch off after’
T Set the time after which the JURA should switch off
automatically.
‘Rinse the milk system’
T Change the setting for the milk system rinsing.
‘5/6’ ‘Water hardness’
T Adjust the water hardness.
J WARNING
23
4 Permanent settings in programming mode
Program
item
Sub-item Explanation
‘6/6’ ‘Product counter’,
‘Day counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all products prepared and view the
number of maintenance programs performed.
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
In the program item
‘Expert mode’ you can make individual
settings for all specialty coffees and hot water. The following
permanent settings can be made:
Product Coffee strength Amount Temperature
‘Ristretto’,
‘Espresso’
8 levels Coffee: 0.5 oz – 2.5 oz (15ml–80ml) normal, high
‘Coffee’ 8 levels Coffee: 0.5oz–8.0oz (25 ml – 240 ml) normal, high
‘2 ristretti’,
‘2 espressi’,
‘2 coffees’
– Coffee: The amount set for the single
product is doubled.
as for single
product
‘Flat white’ 8 levels Coffee: 0.5oz–8.0oz (25 ml – 240 ml)
Milk: 3sec.–120sec.
normal, high
‘Cappuccino’,
‘Latte macchiato’
8 levels Coffee: 0.5oz–8.0oz (25 ml – 240 ml)
Milk: 3sec.–120sec.
Interval: 0sec.–60sec.
normal, high
‘Milk foam’ – Milk: 3sec.–120sec. –
‘Hot water’ – Water: 0.5oz–15.0oz (25 ml – 450 ml) low, normal, high
Permanent settings in programming mode always follow the same
model.
Adjusting the product
settings
J WARNING
24
4 Permanent settings in programming mode
Example:Proceed as follows to change the coffee strength for one
coffee.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To display more products, press the
‘>’ button (bottom right).
T Press the
‘Coffee’ button.
‘Coffee’
T Press the ‘Coffee strength’ button.
‘Coffee’ and the coffee strength is displayed.
T Press the
‘<’ or ‘>’ button to change the setting for the
coffee strength.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Coffee’
T Press the ‘’ button for around 2 seconds to exit
programming mode.
In the program item
‘3/6’/ ‘Customise cup fill volume’ you can make
the following setting:
U
‘Active’: The function ‘Permanently setting the amount of
water for the cup size’ is activated. You can adjust the amount
of water to the cup size by pressing and holding the relevant
preparation button.
U
‘Inactive’: The function ‘Permanently setting the amount of
water for the cup size’ is deactivated. The amount of water
cannot be adjusted to the cup size by pressing and holding
the relevant preparation button.
Example:Proceed as follows to disable the function ‘Permanently
setting the amount of water for the cup size’.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘Customise cup fill volume’ button.
‘Customise cup fill volume’
Enable or disable setting
of cup volume
25
4 Permanent settings in programming mode
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘3/6’
T Press the ‘’ button to exit programming mode.
In the program item
‘3/6’/ ‘One-off settings’ you can make the
following setting:
U
‘Active’: One-off settings can be made during preparation (e.g.
coffee strength or amount of water).
U
‘Inactive’: One-off settings cannot be made during
preparation. The product is prepared according to the
settings in programming mode (
‘3/6’ / ‘Expert mode’).
Example:Proceed as follows to disable one-off settings during prep-
aration.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘One-off settings’ button.
‘One-off settings’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘3/6’
T Press the ‘’ button to exit programming mode.
In the program item
‘3/6’/ ‘Lock/enable’ you can enable or disable
each product individually.
Example:For example, you can disable the preparation of hot water.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘Lock/enable’ button.
‘Lock/enable’
E The lock symbol beside the product name indicates whether
the product is enabled or disabled. If the lock is closed, the
product is disabled.
T Press the
‘ > ’ button until the product ‘Hot water’ is
displayed.
Enable or disable one-off
settings
Enable and disable
products
26
4 Permanent settings in programming mode
T Press the ‘Hot water’ button.
The lock is closed. Hot water preparation is now disabled.
T Press the
‘’ button for around 2 seconds to exit program-
ming mode.
By instructing your JURA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your JURA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘4/6’ is displayed.
T Press the
‘Switch off after’ button.
‘Switch off after’
T Press the ‘<’ or ‘>’ button to change the switch-off time.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/6’
T Press the ‘’ button to exit programming mode.
In the program item
‘4/6’ / ‘Rinse the milk system’ you can make the
following settings:
U
‘Manual’: You are prompted to perform milk system rinsing
10minutes after preparation of a specialty coffee with milk.
U
‘Automatic’: The milk system rinsing is automatically initiated
10minutes after preparation of a specialty coffee with milk.
Example:Proceed as follows to set the milk system rinsing to be
initiated automatically 10 minutes after the preparation.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘4/6’ is displayed.
T Press the
‘Rinse the milk system’ button.
‘Rinse the milk system’
T Press the ‘Automatic’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/6’
T Press the ‘’ button to exit programming mode.
Automatic switch-off
Milk system rinsing
27
4 Permanent settings in programming mode
The harder the water is, the more frequently the JURA needs to be
descaled. It is therefore important to set the water hardness
accurately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The total water hardness can be adjusted on a continuous scale
between 1°dH and 30°dH.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘5/6’ is displayed.
T Press the
‘Water hardness’ button.
‘Water hardness’
T Press the ‘<’ or ‘>’ button to change the setting for the
water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘5/6’
T Press the ‘’ button to exit programming mode.
Example:Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘4/6’ is displayed.
T Press the
‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘4/6’
T Press the ‘’ button to exit programming mode.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘4/6’ is displayed.
T Press the
‘Choose language’ button.
‘Choose language’
E To display more languages, press the ‘ > ’ button (bottom
right).
Setting the water
hardness
Unit for amount of water
Language
28
4 Permanent settings in programming mode
T Press the button that corresponds to the language you want,
e.g.
‘Deutsch’.
‘Gespeichert’ appears briefly on the display.
‘4/6’
T Press the ‘’ button to exit programming mode.
In the program item
‘6/6’ you can view the following information.
U
‘Product counter’: Number of prepared specialty coffees and
hot water
U
‘Day counter’: Number of prepared specialty coffees and hot
water. This counter can be reset to zero.
U
‘Maintenance counter’: Number of maintenance programs
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Example:Proceed as follows to reset the day counter.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘6/6’ is displayed.
T Press the
‘Day counter’ button.
T Press the
‘’ button.
‘Delete the day counter?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘6/6’
T Press the ‘’ button to exit programming mode.
Query counter readings
and version
29
5 Maintenance
5 Maintenance
Use of maintenance products that are harmful to health and
discharge of liquids during maintenance program. Harmful if
swallowed. Irritating to eyes and skin.
T Keep children AWAY.
T Keep children away from the machine while it is performing a
maintenance program.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T When using do not eat or drink.
T Keep maintenance products away from food, drink and
animal food.
T Keep container tightly closed and dry. Keep in a cool place.
Your JURA has the following integrated maintenance programs:
U
Rinsing the machine (‘Rinse the coffee system’)
U
Rinsing the fine foam frother (‘Rinse the milk system’)
U
Cleaning the fine foam frother (‘Clean the milk system’)
U
Changing the filter (‘Filter’)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’)
E Carry out each maintenance program when you are prompted
to do so.
E Press the
‘ Pc’ button to view a list of the maintenance
programs. When the bar is completely filled with red,
your JURA will prompt you to perform the appropriate
maintenance program.
You can start coffee system rinsing manually at any time.
T Place a receptacle under the coffee spout.
T Press the
‘Pc’ button.
T Press the
‘>’ button.
T Press the
‘Rinse the coffee system’ button to start the rinse
operation.
‘Machine is rinsing’, water flows out of the coffee spout. The
operation stops automatically.
J WARNING
Rinsing the machine
30
5 Maintenance
After each milk preparation, the JURA prompts you to perform a milk
system rinse.
E In programming mode, you can set whether the milk system
rinsing is to be prompted 10 minutes after preparation or
initiated automatically (see Chapter 4 ‘Permanent settings in
programming mode – Milk system rinsing’).
Precondition:
‘Rinse the milk system’ is displayed.
T Place a receptacle under the fine foam frother.
T Press the
‘Pc’ button.
‘Milk system is being rinsed’, the fine foam frother is rinsed.
The operation stops automatically.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk.
Non-recommended cleaning agents will not optimally remove milk
residues. This may cause the cappuccino frother to become blocked
and fly off the machine. Discharge of hot steam.
T Use only original JURA milk system cleaner.
Harmful and irritating cleaning agent. Harmful if swallowed.
Irritating to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water
and seek medical advice.
T If swallowed, rinse mouth immediately and drink large
quantities of water. Do not induce vomiting. Seek medical
advice immediately and show label.
E JURA milk system cleaner is available from specialized dealers.
E To clean the milk system, use the container supplied.
T Press the
‘Pc’ button.
Rinsing the milk system
Cleaning the milk system
J WARNING
J WARNING
31
5 Maintenance
T Press the ‘Clean the milk system’ button.
‘Clean the milk system’
T Press the ‘Start’ button.
T Press the
‘Next’ button.
‘Clean the milk system’ / ‘Milk system cleaner’
T Remove the milk pipe from the milk container or carton.
T Add milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the fine foam frother.
T Connect the milk pipe to the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Press the
‘Next’ button.
‘Milk system is being cleaned’ appears and the fine foam
frother and the milk pipe are cleaned.
‘Clean the milk system’ / ‘Fresh water’
T Rinse the container thoroughly and fill the front part with
fresh water up to the upper mark.
T Place this under the fine foam frother and reconnect the
milk pipe to the container.
T Press the
‘Next’ button.
‘Milk system is being cleaned’, the fine foam frother and the
milk pipe are rinsed with fresh water.
The operation stops automatically.
To make sure the fine foam frother works properly, and in the
interests of hygiene, it must be dismantled and rinsed daily if you
have been preparing milk. Your JURA will not prompt you to
dismantle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
6
6
Dismantling and rinsing
the fine foam frother
32
5 Maintenance
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 8.5 oz (250 ml) cold water and 1 capful of JURA
milk system cleaner. Then rinse the parts thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector
System
©
.
Your JURA no longer has to be descaled if you are using the CLEARYL
Smart filter cartridge. If you did not insert the filter cartridge the first
time you used the machine, you can do this now as follows.
T Remove and empty the water tank.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge.
T Open the filter holder.
T Insert the filter cartridge with its extension into the water
tank.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Filter is beingrinsed’, the water flows directly into the drip
tray.
Rinsing of the filter stops automatically.
E If the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Inserting the filter
33
5 Maintenance
E Once the filter cartridge stops working (depending on the
water hardness setting), the JURA will prompt you to change
the filter.
E CLEARYL Smart and CLEARYL Pro Smart filter cartridges are
available from specialized dealers.
Precondition:The filter symbol at the bottom of the display lights
up red.
T Remove and empty the water tank.
T Open the filter holder and remove the old CLEARYL Smart
filter cartridge and filter extension.
T Fit the filter cartridge extension on top of a new CLEARYL
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Saved’ appears briefly on the display. The machine has
automatically detected that you have just changed the filter
cartridge.
‘Filter is beingrinsed’, the water flows directly into the drip
tray.
Rinsing of the filter stops automatically.
Changing the filter
34
5 Maintenance
After 180preparations or 80switch-on rinses, the JURA will prompt
you to clean it.
Non-recommended (e.g. liquid) cleaning agents may contain
substances that could damage the machine or leave residues.
T Use only original JURA cleaning tablets. These are specially
formulated for your machine.
Harmful and irritating cleaning agent. Harmful if swallowed.
Irritating to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water
and seek medical advice.
T If swallowed, rinse mouth immediately and drink large
quantities of water. Do not induce vomiting. Seek medical
advice immediately and show label.
E The cleaning program lasts approximately 20 minutes.
E Do not interrupt the cleaning program. The quality of cleaning
will be impaired if you do so.
E JURA cleaning tablets are available from specialized dealers.
Precondition:
‘Clean machine’ is displayed.
T Press the
‘Pc’ button (red Maintenance symbol).
T Press the
‘Start’ button.
T Press the
‘Next’ button.
‘Empty coffee grounds container’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Clean’
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Press the
‘Next’ button.
‘Machine is being cleaned’, water flows out of the coffee
spout.
The operation is interrupted,
‘Add cleaning tablet’.
Cleaning the machine
J WARNING
J WARNING
35
5 Maintenance
T Open the cover of the filler funnel for ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
T Press the
‘Next’ button.
‘Machine is being cleaned’, water flows repeatedly out of the
coffee spout and the fine foam frother.
The operation stops automatically.
‘Empty coffee grounds container’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Cleaning is now complete.
The JURA builds up deposits of limescale over time and automati-
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
E If you are using a CLEARYL Smart filter cartridge, you will not
be prompted to descale.
Non-recommended descaling agents (e.g. vinegar) may contain
substances that could damage the machine or leave residues.
T Use only original JURA descaling tablets. These are specially
formulated for your machine.
Harmful and irritating descaling agent. Harmful if swallowed.
Irritating to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water.
Remove contact lenses. Seek medical advice.
T If swallowed, rinse mouth immediately and drink large
quantities of water. Do not induce vomiting. Seek medical
advice immediately and show label.
Descaling the machine
J WARNING
J WARNING J WARNING
36
5 Maintenance
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling program to run to the end.
E The descaling program lasts approximately 40minutes.
E JURA descaling tablets are available from specialized dealers.
E If the descaling agent comes into contact with sensitive
surfaces (e.g. marble), damage cannot be ruled out. Clean up
any splashes immediately.
Precondition:
‘Decalcify machine’ is displayed.
T Press the
‘Pc’ button (red Maintenance symbol).
T Press the
‘Start’ button.
T Press the
‘Next’ button.
‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Agent in tank’
T Remove and empty the water tank.
T Completely dissolve 3JURA descaling tablets in a receptacle
holding 17 oz (500 ml) of water. This may take several
minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
T Place a receptacle under the fine foam frother.
T Press the
‘Next’ button.
‘Machine is being descaled’, appears and water flows out of
the fine foam frother repeatedly.
The operation is interrupted,
‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank’
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
NOTICE
37
5 Maintenance
T Place one receptacle under the coffee spout and another
under the fine foam frother.
T Press the
‘Next’ button.
‘Machine is being descaled’, The descaling operation is
continued.
The operation is interrupted,
‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition:
‘Fill bean container’ is displayed.
T Switch the machine off with the On/Off button Q.
T Remove the aroma preservation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.
T Remove the water tank.
T If you use a CLEARYL Smart filter cartridge, remove this.
T Completely fill the water tank and dissolve 3 JURA descaling
tablets in it.
T Leave the water tank with the descaling solution for several
hours (e.g. overnight).
T Empty the water tank and rinse it thoroughly.
T If you use a CLEARYL Smart filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert the
tank.
Cleaning the bean
container
Descaling the water tank
38
6 Display messages
6 Display messages
Message Cause/Result Action
‘Fill water tank’ The water tank is empty.
You cannot prepare any products.
T Fill the water tank (see Chapter 3 ‘Daily
operation – Filling the water tank’).
‘Empty coffee
grounds
container’
The coffee grounds container
is full. You cannot prepare any
products.
T Empty the coffee grounds container
and the drip tray (see Chapter 3 ‘Daily
operation – Daily maintenance’).
‘Drip tray not
fitted’
The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any products.
T Fit the drip tray.
‘Fill bean
container’
The bean container is empty.
You cannot prepare any specialty
coffees, but you can prepare hot
water and milk.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time –
Filling the bean container’).
‘Rinse the milk
system’
The JURA requests a milk system
rinse.
T Perform milk system rinsing
(see Chapter 5 ‘Maintenance –
Rinsing the milk system’).
The filter symbol
at the bottom of
the display lights
up red.
The filter cartridge no longer
works.
T Replace the CLEARYL Smart filter
cartridge (see Chapter 5 ‘Maintenance –
Changing the filter’).
‘Clean machine’ The JURA is prompting you to
clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the machine’).
‘Decalcify
machine’
The JURA is prompting you to
descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine’).
‘Too hot’ The system is too hot to start a
maintenance program.
T Wait for several minutes until
the system has cooled or prepare a
specialty coffee or hot water.
39
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
Insufficient foam is
produced when the
milk is frothed or
milk sprays out of
the fine foam frother.
The fine foam frother is
dirty.
T Clean the fine foam frother (see Chapter 5
‘Maintenance – Cleaning the milk system’).
T Dismantle and rinse the fine foam frother
(see Chapter 5 ‘Maintenance – Dismantling
and rinsing the fine foam frother’).
Coffee only comes
out in drips when it
is being prepared.
The coffee is ground too
finely and obstructs the
system.
T Set the grinder to a coarser setting (see
Chapter 2 ‘Preparation – Adjusting the
grinder’).
‘Fill water tank’ is
displayed although
the water tank is full.
The water tank float is
trapped.
T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water tank’).
Little or no water or
steam comes out of
the fine foam frother.
The pump is very
quiet.
The connector of the
fine foam frother may
be blocked by milk
residues or limescale
fragments loosened
during descaling.
T Remove the fine foam frother.
T Unscrew the black connector with the aid of
the hexagonal hole on the measuring spoon
for ground coffee.
T Clean the connector thoroughly.
T Screw the connector back on by hand.
T Carefully tighten it using the hexagonal hole
on the measuring spoon, turning by no more
than a quarter of a rotation.
Grinder is making a
very loud noise.
There are foreign
objects in the grinder.
T Contact customer support in your country
(see Chapter 11 ‘JURA contact details/ Legal
information’).
‘ERROR2’ or
‘ERROR5’ is
displayed.
If the machine has been
exposed to the cold for
a long period of time,
heating may be disabled
for safety reasons.
T Warm the machine at room temperature.
Other
‘ERROR’
messages are
displayed.
–
T Switch the JURA off with the On/Off button Q.
Contact customer support in your country
(see Chapter 11 ‘JURA contact details/ Legal
information’).
E If you were unable to solve the problem, contact customer
support in your country (see Chapter 11 ‘JURA contact details/
Legal information’).
40
8 Transport and environmentally friendly disposal
8 Transport and environmentally friendly disposal
Keep the packaging for your JURA. It should be used to protect the
machine during transport.
In order to protect the JURA from frost during transport, the system
must be emptied.
T Remove the milk pipe from the fine foam frother.
T Place a receptacle under the fine foam frother.
T Press the
‘Milk foam’ button.
‘Milk foam’ appears and hot steam is discharged from the
fine foam frother.
T Remove and empty the water tank.
T Press the
‘>’ button several times until ‘Amount of milk’ /
‘60sec.’ is displayed.
Steam will continue to be discharged from the fine foam
frother until the system is empty.
‘Fill water tank’
T Press the On/Off button Q.
Your JURA is switched off.
Please dispose of old machines in an environmentally neutral way.
H
Transport/ Emptying the
system
Disposal
41
9 Technical data
9 Technical data
Voltage 120V~, 60Hz
Power 1450W
Ambient conditions Humidity max. 80%
Ambient temperature
50–95 °F (10–35 °C)
Conformity mark
Pump pressure static, max. 15bar
Holding capacity of water tank
(without filter)
105 oz (3l)
Holding capacity of bean container 17 oz (500 g)
Holding capacity of coffee grounds
container
max. 25portions
Cord length approx. 47 in.
(approx. 1.2 m)
Weight approx. 22lb
(approx. 10.0kg)
Dimensions (WHD) 11.6 16.4 17.5in.
(29.5 41.75 44.36cm)
Information for testers (repeat test in accordance with DIN VDE
0701-0702): The central grounding point (CGP) is located on the
underside of the machine, right next to the power cord's
connection point.
The machine complies with the following directives:
U
Standard UL 1082
U
Canadian Standard CSA C22.2 No. 64
Directives
42
10 Index
10 Index
A
Addresses 48
Adjusting the product settings 23
Aroma preservation cover
Bean container with aroma preservation
cover 8
Automatic switch-off 26
B
Bean container
Bean container with aroma preservation
cover 8
Cleaning 37
Filling 10
Bus bar
Technical data 41
Button
On/Off button 8
C
Cappuccino 16
Cappuccino frother cleaning
Cleaning the milk system 30
Cappuccino frother rinsing
Rinsing the milk system 30
Central grounding point 41
Cleaning
Bean container 37
Machine 34
CLEARYL Smart filter cartridge
Change 33
Insert 32
Coffee 16
Two coffees 17
Coffee grounds container 8
Coffee spout
Height-adjustable coffee spout 8
Consistency of grind
Adjusting the grinder 19
Grinder adjustment switch 8
Contact details 48
Cover
Filler funnel for ground coffee 8
Water tank 8
Cup platform 8
Customer support 48
D
Daily maintenance 20
Day counter 28
Descaling
Machine 35
Water tank 37
Disable
Products 25
Display 9
Display messages 38
Disposal 40
Double product 17
Drip tray 8
E
Emptying the system 40
Enable
Products 25
Errors
Troubleshooting 39
Espresso
Two espressi 17
Espresso 16
F
Filler funnel
Filler funnel for ground coffee 8
Filling
Bean container 10
Water tank 20
Filter
Change 33
Insert 32
Fine foam frother 8
Cleaning 30
Dismantling and rinsing 31
Professional fine foam frother 9
Rinsing 30
First-time use 11
With filter cartridge activation 12
Without filter cartridge activation 13
Flat white 16
G
Grinder adjustment switch 8
43
10 Index
Ground coffee 17
Measuring spoon for ground coffee 9
Grounding point 41
H
Height-adjustable coffee spout 8
Homepage 10
Hotline 48
Hot water 19
Hot-water nozzle 9
I
Important safeguards
Safety 4
Instant coffee
Ground coffee 17
Internet 10
J
JURA
Contact details 48
Internet 10
L
Language 27
Latte macchiato 16
M
Machine
Cleaning 34
Daily maintenance 20
Descaling 35
Regular maintenance 21
Rinsing 29
Setting up 10
Switching off 21
Switching on 20
Maintenance 29
Daily maintenance 20
Regular maintenance 21
Maintenance counter 28
Measuring spoon for ground coffee 9
Messages, display 38
Milk
Connecting milk 14
Milk foam 17
Milk system
Cleaning 30
Rinsing 30
Milk system rinsing 26
N
Number
Maintenance programs 28
Preparations 28
P
Permanently setting the water for the cup
size 18
Permanent settings in programming mode
22
Power cord 8
Preparation 15, 16
Cappuccino 16
Coffee 16
Espresso 16
Flat white 16
Ground coffee 17
Hot water 19
Latte macchiato 16
Milk foam 17
Ristretto 16
Two coffees 17
Two espressi 17
Two ristretti 17
Two specialty coffees 17
Problems
Troubleshooting 39
Product counter 28
Products
Disable 25
Enable 25
Product settings
Adjusting 23
Professional fine foam frother 9
Programming mode 22
Automatic switch-off 26
Counter readings and version 28
Enable or disable setting of cup volume
24
Language 27
44
10 Index
Milk system rinsing 26
One-off settings 25
Setting the water hardness 27
Unit for amount of water 27
R
Regular maintenance 21
Rinsing
Machine 29
Ristretto 16, 17
Two ristretti 17
S
Safety
Important safeguards 4
Settings
Permanent settings in programming
mode 22
Setting up
Setting up the machine 10
Short operating instructions 10
Switching off 21
Switching on 20
Switch-off
Automatic switch-off 26
Symbol description 3
T
Technical data 41
Tel 48
Transport 40
Troubleshooting 39
Two products 17
U
Unit for amount of water 27
Use, First-time 11
V
Version 28
W
Water hardness
Determining the water hardness 10
Setting the water hardness 27
Water tank 8
Descaling 37
Filling 20
Website 10
45
– intentionally blank –
46
– intentionally blank –
47
– intentionally blank –
48
11 JURA contact details/ Legal information
J72953/WE8/US-en/201702
11 JURA contact details/ Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Switzerland
USA: JURA Inc. Canada: FAEMA
Customer Service
Phone
E-Mail
1-800-220-5701
1-(855)-544-8600
info@juracanada.ca
Opening Hours (EST) Mon – Thu 9am – 9pm
Fri 9am – 8pm
Sat 9am – 5pm
Distributor Address
Phone
Fax
20 Craig Road
Montvale, NJ 07645
001 (201) 767-3999
001 (201) 767-9684
115 Matheson Boulevard East
Mississauga, Ontario, L4Z 1X8
1-(905)-501-8600
Internet www.us.jura.com www.ca.jura.com
@ You will find additional contact details for your country at
www.jura.com.
We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colors of the machine. Some details of
your JURA may vary.
Your opinion is important to us! Use the contact details at
www.jura.com.
The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.
Technical changes
Feedback
Copyright
