Loading ...
Loading ...
Loading ...
Frequently Asked Questions
123
Problem Possible cause and solution
System Lock appears
in the display when the
oven is turned on.
The system lock is On.
You can unlock the oven to start a cooking
program by pressing for at least 6 seconds.
To permanently deactivate the lock, see "Settings -
System Lock ".
The oven does not heat
up.
Demo mode is activated.
The oven can be operated but will not heat up.
Deactivate Demo mode (see "Settings –
Showroom Program").
Power Failure - Program
Canceled appears in the
display.
There has been a power failure which has caused the
current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
12:00 appears in the
display.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
Maximum operating
duration reached appears
in the display.
The oven was operated for an unusually long period
of time. The Safety cut-out feature has been
activated.
Confirm with OK. Clear the message Program
Finished by selecting "Back".
The oven is now ready to use.
Fault XX appears in
the display.
A fault has occurred that you cannot resolve.
Contact Miele Technical Service.
The core temperature
cannot be set.
The roast probe is not recognized by the oven.
Check whether the roast probe is correctly
plugged into the socket.
If the oven still does not recognize the roast probe, it
must be faulty. A replacement roast probe can be
ordered from Miele.
If the door is opened
while using
"Microwave" , the
oven stops making a
noise.
This is not a fault. If the door is opened while
"Microwave" is being used, the door contact
switch will turn off the microwave and switch the
cooling fan to a lower speed.
Loading ...
Loading ...
Loading ...