Loading ...
Loading ...
Loading ...
English - 14
CHECKING THAT YOUR OVEN IS OPERATING
CORRECTLY
The following simple procedure enables you to check that your oven is working correctly
at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on the
page31-32.
The oven must be plugged into an appropriate wall socket. The turntable must be in
position in the oven. If a power level other than the maximum (100 % - 1000 W) is
used, the water takes longer to boil.
Open the oven door by pulling the handle on the right side of the door.
Placeaglassofwaterontheturntable.Closethedoor.
Press the START/+30s button and set the time to 4 or
5minutes, by pressing the START/+30s button the appropriate
number of times.
Result: The oven heats the water for 4 or 5 minutes. The
water should then be boiling.
SETTING THE TIME
When power is supplied, “88:88” and then “12:00” is automatically displayed on the
display.
Please set the current time. The time can be displayed in either the 24-hour or 12-hour
notation. You must set the clock:
• Whenyourstinstallyourmicrowaveoven
• Afterapowerfailure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1. Press the Multi Function Selector Dial.
2. Turn the Multi Function Selector Dial to set time display
type. (12H or 24H)
3. Press the Multi Function Selector Dial to complete the
setup.
4. Turn the Multi Function Selector Dial to set the hour.
5. Press the Multi Function Selector Dial.
6. Turn the Multi Function Selector Dial to set the minute.
7. When the right time is displayed, press the Multi Function
Selector Dial to start the clock.
Result: The time is displayed whenever you are not
using the microwave oven.
MS32H5125AK_SA_DE68-04247F-00_EN.indd 14 10/9/2014 12:05:15 PM
Loading ...
Loading ...
Loading ...