Loading ...
Loading ...
Loading ...
Closing without the jam protection
system
In case of danger from the outside or if ice
might prevent normal closing, proceed as fol‐
lows:
1.
Pull the switch past the resistance
point and hold it there.
The window closes with limited jam protec‐
tion . If the closing force exceeds a specific
threshold, closing is interrupted.
2.
Pull the switch past the resistance
point again within approx. 4 seconds and
hold it there.
The window closes without jam protection .
Safety switch
General information
The opening and closing of the rear window
can be blocked via the safety switch for the
rear. This makes sense, e.g., if children or ani‐
mals are carried in the rear.
If an accident of a certain severity occurs, the
safety function is switched off automatically.
Overview
Switching on and off
Press button.
The LED lights up if the safety function
is switched on.
Malfunction
General information
In certain situations a window can only be op‐
erated to a limited extent.
▷ After a power failure during the opening or
closing process, the a window can only be
operated to a limited extent. The system
must be initialized in this case.
▷ The power window motors are equipped
with overheating protection. If a window is
opened and closed several times within a
short period of time, the overheating pro‐
tection switches the motor off temporarily.
Depending on the degree of overheating, it
may only be possible to close the window
or it may not be possible to operate it at all.
In this case: allow the power window motor
to cool down.
Initializing the system
The system can be initialized when the vehicle
is stationary and the engine is running.
During initialization, the affected window
closes without jam protection .
WARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of
injury or risk of property damage. Make sure
that the area of movement of the windows is
clear during opening and closing.◀
1.
Open the affected window completely.
2.
Pull the switch to the resistance point
and hold.
The window closes.
3.
Continue holding the switch pulled to
the resistance point.
Seite 61
Opening and closing
CONTROLS
61
Online Edition for Part no. 01 40 2 976 632 - X/16
Loading ...
Loading ...
Loading ...