Loading ...
Loading ...
Loading ...
7
Getting the best from your new juicer...
C
ongratulations on becoming a Morphy Richards Slow Juicer
o
wner. The Slow Juicer actually extracts juice faster than most
typical juicers and expels a much higher yield with much drier
pulp.
The method of extractions is masticating and pressing, using
t
he screw-like auger like a mortar and pestle. The action tears
o
pen the food’s cell membranes and releases its deep-seated
n
utrients and enzymes. It also breaks up more of the
phytonutrients, resulting in a richer coloured juice that retains
more vitamins and minerals. The slow RPM ensures that the
cellular structure of fruits and vegetables is kept intact,
eliminating oxidations and separation. Thus, it preserves the
precious enzymes and nutrients that are closest to their natural
form, even from wheatgrass, soy, and leafy greens.
For better use and optimal results, please follow the instructions
carefully. Please refer to the instruction manual if you are having
technical difficulties or are unsure of usage of the appliance.
Do not exceed 15 minutes of continuous operation.
Features
(1) Hopper
(2) Squeezing screw
(3) GE Ultem Strainer
(4) Spinning Brush
(5) Bowl
(6) Pulp outlet
(7) Juice outlet
(8) Base w/ Handle
(9) Cleaning Brush
(10) Pusher
(11) Containers (x2)
1
(12) Safety Feature
As shown, the hopper edge must point to "close" sign on the
base in order for the machine to operate properly.
Assembly instructions
2
Place the strainer into the spinning brush.
3
Place the strainer + spinning brush into the bowl.
Be sure to align the white dot on top of the strainer and the white
d
ot on top of the bowl.
When two dots are properly aligned, strainer should lock into the
b
owl preventing it from moving around.
4
Place squeezing screw inside the strainer and rotate until it falls
i
nto place.
5
Assemble the hopper onto the bowl.
Be sure to align the arrow on the Hopper to the white dot on top
o
f the strainer and bowl, and twist to close so that the arrow is
p
ointing to the "Close"position.
6
Assemble the entire Top Set onto the base.
As shown, once the Top Set is put on the base, twist the whole
Top Set so that the hopper edge is pointing to the "Close" sign on
the base.
Assembly Instructions
7
Plug in the unit.
8
Place containers under both the Juice & pulp ejectors
Underneath the bowl, there is a yellow rubber pad called the
Extraction Packing which allows all of the juice to only discharge
from the juice outlet. Before juicing, please make sure the
Extraction Packing is plugged in completely to prevent any
leakage.
How to use
9
The slow juicer has three settings.
1 "On" starts motor/makes juice.
2 "Rev"reverses motor and is to be used only when food is
stuck
3 “Off” stops motor/turns off unit
10
Inputting food into the slow juicer:
a Rinse food thoroughly before juicing.
b Be sure to cut food into pieces no larger than 2 inches
for optimal extraction, and remove any large, hard seeds.
c Turning"On" the slow juicer, drop food into feeding tube.
Do not push, force or over stuff. The pusher provided is
only to be used when food becomes stuck. Insert food at
a slow pace, allowing all the pulp to extract.
11
Turn “Off” when done.
• Ensure that hands are completely dry before touching the switch.
• Do not operate with an empty bowl.
• Left over juice should be immediately refrigerated or frozen.
g
o
FP404000MAUS Rev4.qxp_Morphy Richards Instruction Book 13/07/2015 18:10 Page 7
Loading ...
Loading ...
Loading ...