Loading ...
Loading ...
Loading ...
15
FINAL INSTALLATION
7.Removethepreassemblednial(L),nialcap(K),hex
nut (T) and rubber washer (U) from the light kit (J). Lift
the glass bowl (N) onto the threaded rod at the bottom
of the light kit (J).
Feed the pull chain coming from the grommet in the
lightkit(J)throughtheo-centerholeintheglassbowl
(N). Feed pull chain coming from the center of the light
kit (J) through the center hole in the glass bowl (N).
Secure glass bowl (N) with rubber washer (U) and hex
nut(T).Thenattachnialcap(K)andnial(L).
Proceed to Step 10.
8. To install the fan without the light kit (J), remove
the preassembled hex nut and lock washer from the
threaded rod on the inside of the switch housing cap (I).
Remove light kit (J) from the switch housing cap (I) and
discard, then install the plug button (EE) into the center
hole of the switch housing cap (I).
Hardware Used
EE
Plug Button x 1
9. Remove the three switch housing screws (X) from the
switch housing cap (I). Then, attach the switch housing
cap (I) to the switch housing (H) using the switch
housing screws (X).
Note: Align the notch in the switch housing cap (I) with
the reverse switch on the switch housing (H).
8
I
EE
I
J
U
N
J
T
K
L
7
I
X
H
9
Notch
Loading ...
Loading ...
Loading ...