Loading ...
Loading ...
Loading ...
14
FINAL INSTALLATION
4. Install the blade arm (P) to the underside of the motor
assembly (G) with motor screws (R) previously removed
(Step 6, page 8). Tighten with Phillips screwdriver.
Repeat for each blade arm (P).
Note: If you wish to install the fan without the light kit
(J), proceed to Step 8.
5. To install the light kit (J),rstremovethethreeswitch
housing screws (X) from the switch housing cap (I).
Then connect the single-pin connector from the switch
housing (H) to the single-pin connector from the light
kit (J) -- Black to Black and White to White. Secure the
switch housing cap (I) with light kit (J) to the switch
housing (H) using the previously removed switch
housing screws (X).
Note: Align the notch in the switch housing cap (I) with
the reverse switch on the switch housing (H).
6. Install the bulbs (M) into the sockets on the light kit (J).
IMPORTANT: Make sure you allow the bulbs (M) and
light kit (J) to cool before you replace the bulbs.
4
5
P
H
J
I
X
R
G
6
M
J
Notch
Loading ...
Loading ...
Loading ...