Loading ...
Loading ...
Loading ...
12
TROUBLESHOOTING CONTINUED
6. Clothes are being bleached.
Incorrect Flow Rate Setting.
Ensure you have the correct setting chosen based upon your type of washer. If your
problem continues go to pureWash.com/Support for a repair.
7. Suds in the basin after rst uses.
Detergent or residue is being cleaned out.
Run multiple washes without clothing until the problem is resolved. If problem
persists contact your dealer or go to pureWash.com/Support.
8. Discoloration occurs in the viewing tube.
High Tannin levels in your water source.
The use of a pre-lter is required. Contact local water specialist to nd proper lter to
remove Tannins.
9. Clothes have a rusty colored stain to them.
High Iron levels in your water source.
Do not dry or bleach the clothes as it will worsen the effects. Re-wash them in a
clean water source before drying. The use of our pre-lter (page 16) or an Iron specic
pre-lter is required.
Loading ...
Loading ...
Loading ...