Loading ...
Loading ...
Loading ...
Installation
55
EN
3. Remove the flame-spreader crowns and
relative burner caps.
4. Remove the gasket on each burner's
thermocouple and igniter.
5. Remove the top.
Replacing the nozzles/air regulation
1. Unscrew screw "A" and push air
regulator "B" as far as it will go.
2. Use a spanner to remove the nozzles "C"
and install the new ones for the required
gas supply, following the indications
given in the relevant table (see "Gas
types and Countries").
Loading ...
Loading ...
Loading ...