Loading ...
Loading ...
Loading ...
2. Firmly screw the air compressor hose
onto the valve stem by turning
clockwise.
3. With the compressor off, the gauge of
the kit will display the tire inflation
pressure.
Note: If you are proceeding from the First
stage: Reinflating the tire with sealing
compound and air section and have injected
sealant in the tire and the pressure is below
20 psi (1.4 bar), stop and call roadside
assistance. If tire pressure is above 20 psi
(1.4 bar), continue to the next step.
4. If required, turn on the compressor and
adjust the tire to the recommended
inflation pressure shown on the tire
label located on the driver's door or
door jamb area. The tire pressure
should be checked with the
compressor turned OFF in order to get
an accurate pressure reading.
5. Unscrew the compressor hose from
the valve stem and re-install the valve
cap. Leaving the sealant bottle
attached to the compressor unit, safely
store in your vehicle the tire sealant and
inflator kit, the bottle lid and the orange
cap.
What to do after the tire has been
sealed
Note: After the sealing compound has been
used, the maximum vehicle speed is 50 mph
(80 km/h) and the maximum driving
distance is 124 mi (200 km). The sealed tire
should be inspected immediately.
You can check the tire pressure any time
within the 124 mi (200 km) by performing
the procedure from Second stage:
Checking tire pressure.
Regularly check the tire pressure until the
sealed tire is repaired or replaced by a tire
specialist. Before the tire is removed from
the trim, you must inform the tire specialist
that the tire contains sealant.
After using the kit to seal your tire, you will
need to replace the sealant canister and
hose. Sealant canister and hose service
kits can be obtained at an authorized Ford
dealer. Empty sealant canisters may be
disposed of at home. However, canisters
still containing liquid sealant should be
disposed of by your local authorized Ford
dealer or tire dealer, or in accordance with
local waste disposal regulation.
TIRE CARE
Information About Uniform
Tire Quality Grading
Tire Quality Grades apply to new
pneumatic passenger car tires.
The tire Quality Grades can be
found where applicable on the tire
sidewall between tread shoulder
and maximum section width. For
example: Treadwear 200
Traction AA Temperature A.
These Tire Quality Grades are
determined by standards that the
United States Department of
Transportation has set.
255
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing
Wheels and Tires
Loading ...
Loading ...
Loading ...