Loading ...
Loading ...
Loading ...
1. Pull the luggage cover upward to
release it from the retaining points on
both sides.
2. Rotate the luggage cover 90° to
remove.
Install in reverse order. When you hear a
click sound, the luggage cover is locked on
the retaining points.
ROOF RACKS AND LOAD
CARRIERS
WARNING: When loading the roof
racks, we recommend you evenly
distribute the load, as well as maintain
a low center of gravity. Loaded vehicles,
with higher centers of gravity, may
handle differently than unloaded
vehicles. Take extra precautions, such
as slower speeds and increased stopping
distance, when driving a heavily loaded
vehicle.
Maximum recommended load, evenly
distributed on the crossbars:
WeightTiresEngine
15 lbs (6.8
Kg)
16"1.0 L
Ecoboost
44 lbs (20
Kg)
17"1.0 L
Ecoboost
55 lbs (25
Kg)
-2.0 L 4WD
Note: Loads should never be placed
directly on the roof panel.
The roof panel is not designed to directly
carry a load.
For proper function of the roof rack system,
loads must be placed directly on crossbars
affixed to the roof rack side rails. Your
vehicle may be equipped with
factory-installed crossbars. Ford Genuine
Accessory crossbars, designed specifically
for your vehicle, are also recommended for
use with your roof rack system.
Make sure that the load is securely
fastened. Check the tightness of the load
before driving and at each fuel stop.
Adjusting the Crossbar (If Equipped)
Note: Wind noise can be minimized by
either removing or repositioning the crossbar
when not is use. Position the front crossbar
in the intermediate position to minimize
wind noise. The crossbar can be adjusted
or removed using the steps below.
175
EcoSport (CBW) Canada/United States of America, Vehicles Built From: 17-06-2019, LN1J-19A321-ZFA enUSA, Edition date: 201904, First-Printing
Load Carrying
Loading ...
Loading ...
Loading ...