HLP21N User Manual

Loading ...

OPTION 2 - PORTABLE

NOTE: In order for this washer to meet the regulated energy standards, the faucet

supplying the water must be set to cold.

Remove the aerator from your faucet nozzle.

2. Examine the faucet to determine if it has internal or external faucet threads.

•

Internal threads - Keep the rubber washer

in place

•

External threads - Remove the rubber washer

before threading the

faucet connector onto the faucet.

Removable Washer

Secondary Washer (Do not remove)

Washer Support (Do not remove)

Silver Faucet Connector

NOTE:Thefaucetconnector(provided)isthreadedsothatitwilltMOST

faucets.Iftheprovidedfaucetconnectordoesnottyourfaucet,youwillneed

to purchase a faucet connector in the correct size.

Thread the silver faucet connector onto the faucet.

Internal Threads External Threads

Rubber Washer

Silver Faucet Connector

Quick-sink Faucet Adaptor

Water Inlet Hose

4. Attach the quick-sink faucet adaptor to the grey end of the inlet hose making

surethepre-installedatwasherisbetweenthehoseandtheadaptor.

5. Attach the quick-sink faucet adaptor to the silver faucet connector by pulling

down on the white collar while pushing upwards on the faucet. Release the white

collar and it will lock into place.

Turn on the water faucet and check for leaks. If there is any leaking, check for

loose connections and tighten.

Loading ...

User Manual - Page 17