HLP21N User Manual

Loading ...

STEP 5 - LEVEL THE WASHER

IMPORTANT: Proper leveling of the washer will help reduce noise and vibration.

1. Stand the washer upright.

NOTE: If you installed casters, unlock them by lifting up on the tab.

2. Placewasherinitsnallocation.Checkthatthewateranddrainlinesarenot

strainedorpinched.Makesurethatallfourfeetarermlyincontactwiththe

oorandthatthewasherrestssolidlyinposition.

3. Using a carpenter’s level, check to make sure the washer is level from side to

side and from front to back.

If the washer is not level, adjust the leveling feet or casters. Turn clockwise to

extend (raise the washer) or counterclockwise to retract (lower the washer).

NOTE: If the washer is inclined more than 2°, it will not operate.

FIXED LEVELING FEET

1. Loosen the adjustable large, outer ring, and then turn the center foot clockwise

or counterclockwise to adjust the height.

Raise Lower

Outer Ring

Center Foot

2. Once the washer is level, lock the position of each leveling foot by tightening the

large, outer ring.

Loading ...

User Manual - Page 14