Loading ...
Loading ...
Loading ...
8
4. Use a ³⁄₁₆" drill bit to drill 3 starter holes ³⁄₈" deep through the
3 holes in the cabinet and into the windowsill.
5. Attach the cabinet to the windowsill with 3 - #10 x ¹⁄₂" pan-
head Phillips screws.
6. Check that the air conditioner cabinet is tilted to the outside
so that water will run to the outside.
Attach Side Curtains to Window Frame
1. Pull the left-hand curtain out until it fits into the window
channel. Use a ³⁄₃₂" drill bit to drill a starter hole through the
hole in the curtain housing and into the lower window sash.
Front View
Top View
2. Insert one of the #10 x ³⁄₄" round-head screws through the
hole and into the lower window sash.
3. Insert one of the #10 x ³⁄₄" round-head screws through the
threaded hole in the top of the curtain.
4. Repeat for the right-hand curtain.
Complete Window Installation
1. Insert the foam window sash seal behind the top of the lower
window sash and against the glass of the upper window.
2. Place the window lock bracket on top of the lower window
and against the upper window sash.
3. Use a ³⁄₃₂" drill bit to drill a starter hole through the hole in the
bracket and into the window sash.
4. Attach the window lock bracket to the window sash with
#10 x ³⁄₄" round-head screw to secure the window in place.
Through-the-Wall Cabinet Installation
NOTES:
■ Handle the air conditioner gently.
■ Be sure your air conditioner cabinet does not fall out of the
opening during installation or removal.
■ The location where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded
3prong outlet.
■ Do not block the louvers on the front panel.
■ Do not block the louvers on the outside of the air conditioner.
■ It is the customer's responsibility and obligation to have this
product installed by a qualified technician familiar with
through-the-wall room air conditioner installations.
A. #10 x
¹⁄₂
" pan-head Phillips screws
B. Windowsill
A. Window channel
B. Left-hand curtain
C. #10 x
³⁄₄
" round-head screw
A
A
B
A
B
C
A. #10 x
³⁄₄
" round-head screw
B. Hole for #10 x
³⁄₄
" round-head screw
A. Window lock bracket
B. Foam window sash
seal
C. Upper window glass
D. #10 x
¹⁄₂
" pan-head Phillips screws (3)
A
B
A
B
C
D
D
Loading ...
Loading ...
Loading ...