Loading ...
Loading ...
Loading ...
10
Complete Installation
NOTE: Handle the air conditioner gently.
1. Make sure the free end of the ground wire is outside of the
cabinet.
2. Insert the air conditioner into the cabinet.
NOTE: Make sure the free end of the ground wire is outside
of the cabinet.
3. Connect the green ground wire to the ground screw.
Position the ground wire pointing straight up. Put the excess
ground wire between the coil and the air conditioner cabinet.
4. Insert the front tabs of the front panel into the top of the
cabinet and swing the front into place.
5. Attach the bottom front of the panel with the front panel
screws. Replace the control knobs (on some models).
NOTE: For through-the-wall installations, if needed, install
molding around the room side of the cabinet.
6. Plug into a grounded 3 prong outlet.
7. Press RESET on the power supply cord. See Electrical
Requirements.
A. Ground wire outside of the cabinet
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
A
WARNING
Electrical Shock Hazard
Connect green ground wire to ground screw.
Failure to do so can result in death or electrical shock.
A. Green ground wire
B. Ground screw
B
+
+
+
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Loading ...
Loading ...
Loading ...