Loading ...
Loading ...
Loading ...
7
10” Steam Iron with Retractable Cord
www.insigniaproducts.com
Spraying the fabric
You can use the spray feature at any time to help eliminate wrinkles. It
does not affect the temperature of the iron.
1 Open the water inlet cover and fill the iron with water.
2 Aim the spray nozzle at the garment.
3 Press the spray pump.
Using the Burst of Steam
This feature provides an extra amount of steam to help remove stubborn
wrinkles.
1 Open the water inlet cover and fill the iron with water.
2 Stand the iron upright and plug it in.
3 Turn the temperature control dial to the maximum setting.
4 The temperature indicator turns off when the temperature you want is
reached. The iron is ready for use.
5 Press the Burst of Steam pump. Steam penetrates the garment and
remove stubborn wrinkles.
6 Press the Burst of Steam pump a second or third time. Usually, all
wrinkles can be removed within three steam bursts. For best results,
wait three seconds between each burst.
Cleaning and maintaining your iron
Using the self-clean function
You can use the self-clean function to remove scale and impurities from
your iron. The self-clean function should be used approximately once
every two weeks. If the water in your area is very hard, the self-clean
function should be used more frequently.
1 Unplug the iron.
2 Set the steam control knob to the “0” position.
3 Open the water inlet cover and fill the iron with water.
4 Select the maximum ironing temperature.
5 Plug in the iron.
6 When the temperature indicator turns off, unplug the iron.
7 Hold the iron over the sink, then press and hold the self-clean button
and gently shake the iron. Steam and boiling water come out of the
sole plate and any impurities and flakes are flushed out.
8 Release the self-clean button as soon as all water in the reservoir has
been drained.
NS-IR10BL7_NS-IR10PK7_16-0214_MAN_V2_ENG.fm Page 7 Friday, April 22, 2016 1:03 PM
Loading ...
Loading ...
Loading ...