Loading ...
Loading ...
Loading ...
English 31
Before you start
Operations
Control panel
02
08
09
10
11
01
03 04 05 06 07
01 Course Selector Turn the dial to select a course.
02 Display
The display shows current course information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current course.
04 Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5.
05 Spin
Press to change the spinning speed for the current course.
• Rinse Hold (No indicator): The nal rinse cycle is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin cycle.
• No Spin
: The drum does not spin after the nal drain cycle.
• Spin Only : To run the Spin Only cycle, press Spin for 3
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
06 Dry Level Press this button to select proper drying option.
07 Bubble Soak
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
WD90K6410OX_03745E-02_EN.indd 31 2016/11/10 17:01:19
Loading ...
Loading ...
Loading ...