Loading ...
Loading ...
Loading ...
Eject function
Press the control to stop and eject a
CD.
Setting the clock
• Ensure that the ignition is in the
ACC or ON position.
• Press and momentarily hold the
CLOCK control until a beep is
heard. The current time will flash
in the display.
• Press the
to increase the hours.
• Press the
to increase the minutes.
• Press the CLOCK control again when the desired time is set to
activate the clock.
NOTE: If the power supply to the unit is interrupted (if the fuse blows
or the vehicle’s battery is disconnected), the clock will need to be reset.
NOTE: If the time is not adjusted while the clock’s current time is
flashing (if neither
or is pressed), and the CLOCK control is
pressed a second time, the minutes will be set to 00. If the current time
setting is within the first half of the hour (01–29), the hour setting will
automatically reverse one hour. For example, if the original setting is
3:24, the time will change to 3:00. If the clock’s current time setting is
within the latter part of the hour (from 30 to 59 minutes), the hour
setting will automatically advance one hour. For example, if the original
setting is 3:45, the time will change to 4:00.
Changing the display mode
Press the CLOCK control to
alternate the display between time
and audio.
NOTE: If audio operation is selected while the time mode is on, the
selected audio mode will be displayed for 10 seconds, then the display
will revert to the time mode.
+
CLOCK
H
M
TUNE
SEEK
TRACK
CLOCK
Entertainment Systems
25
Loading ...
Loading ...
Loading ...