Loading ...
Loading ...
Loading ...
15 – ENGLISH
6.
Use the pq buttons to set how often the alarm should be set to wake, then press Select.
7. Lastly, use the pq buttons to set the volume level of the alarm, then press Select. To
ensure there is sound when the alarm activates, the alarm’s volume level cannot be set
below a minimum level. Also, if enabled, the “Volume Limit” feature under the Auxiliary
Menu will affect the alarm volume.
8. Repeat this process for Alarm 2 if desired.
If you make a mistake at any point in the process, press the Back button on the remote and
begin again.
Note: Your settings will not be saved unless you complete the entire process and the
display shows “Alarm Saved”.
Note: If you set the alarm source to DAB and the last listened or preset station is unavail-
able at the time the alarm sounds, the alarm will default to the tone.
Power Loss: Should power be lost, or the Albergo+ becomes disconnected, the
alarm time will be saved but the Albergo+ alarm cannot sound if there is no power.
Alarm Options
The alarm sounds with a gradual volume increase. When the alarm sounds you can acti-
vate the Snooze feature or shut the alarm off.
Snooze: To activate Snooze while the alarm is sounding, press the Snooze button on the
remote, or briefly press the Multi-Function Control Wheel on top of the unit. The Snooze time
is not adjustable. Pressing the Snooze button again while still in Snooze mode will re-set
the Snooze timer back to 10 minutes. While the alarm is sounding, press and hold down the
Snooze top wheel to turn off the alarm and the unit, or press the respective alarm button.
Alarm off: To stop the alarm while it is sounding, press the Alarm button on the unit or
remote, or press and hold the Multi-Function Control Wheel on top of the unit. You can
also press the Power button on the remote.
Alarm Quick Set: With the Albergo+ in Standby, repeatedly press the alarm button on the
remote briefly to toggle each alarm on or off.
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth 2.1+EDR A2DP and your device is
not connected to any other Bluetooth product. Devices may pair differently. Below is a
general guide.
1. Press the Albergo+'s front panel Bluetooth button or change the source to Bluetooth.
This will power on the Bluetooth. Turn the volume up about ¼ to start. Also turn up the
volume on the source device (the device you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3.
Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to
initiate searching. Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli
Bluetooth” will change from “Not Paired” to “Connected”.
4. You will hear a ring tone from the Albergo+ confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should
not have to pair your device again. Depending on your device, you may need to
make multiple attempts at Pairing and/or Connecting to the Albergo+, but please
give your device adequate time to Pair or Connect before repeating the process.
Loading ...
Loading ...
Loading ...