Loading ...
Loading ...
Loading ...
At this point, follow the instructions provided for a “Drying only” cycle.
Repeat this procedure for the remainder of the load. Note: a cooling-down
period is always added to the end of each drying cycle.
Drying only
Press button “Dry only” to perform the drying-only cycle. After selecting
the desired cycle (compatible with the type of garments), press button
“Dry only” to exclude the washing phase and start the drying phase at the
maximum level for the selected cycle. The drying level or time may be set
and changed by pressing the drying button “Drying settings”.
CHILD LOCK
to lock the control panel, press and hold the button “Dry only” for
approximately 3 seconds. the symbol lights on the display to indicate
that the control panel is locked (with the exception of the button). This
prevents unintentional changes to programmes, especially with children
near the machine.
If any attempt is made to use the control panel, the symbol ashes on
the display.
To unlock the control panel, press and hold the button “Dry only” for
approximately 3 seconds.
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixed bres, synthetics, wool, garments to be
hand-washed). Colour (separate coloured garments from whites, wash
new coloured garments separately). Delicates (small garments – such as
nylon stockings – and items with hooks – such as bras: insert them in a
fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washing machine and
the drum. Check all buttons.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washing machine
o and disconnect it from the mains power. Do not use ammable liquids to
clean the washing machine.
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washing machine and help to prevent leaks.
Unplug the washing machine when cleaning it and during all
maintenance work.
Clean the washing machine
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water. Do not use solvents or
abrasives.
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant
odours from forming.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every spin and
to distribute the load in a uniform manner, the drum rotates continuously
at a speed which is slightly greater than the washing rotation speed. If,
after several attempts, the load is not balanced correctly, the machine
spins at a reduced spin speed. If the load is excessively unbalanced, the
washing machine performs the distribution process instead of spinning. To
encourage improved load distribution and balance, we recommend small
and large garments are mixed in the load.
TRANSPORT AND HANDLING
Do not lift the washing machine by gripping it from the upper section.
Unplug the appliance and close the water tap. Check that the door and
detergent dispenser drawer are tightly closed. Detach the lling hose
from the water tap then detach the drain hose. Empty all the water
remaining in the hoses and secure the latter so that they do not get
damaged during transport. Apply the transport bolts back on. Repeat, in
reverse order, the transport bolt removal procedure described in the
“Health & Safety and Installation Guides”.
Loading ...
Loading ...
Loading ...