Loading ...
GB
Quick Guide
CONTROL PANEL
WASH CYCLE TABLE
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed.
For more detailed instructions on how to remove them, see the Installation Guide.
PRODUCT DESCRIPTION
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter
7. Adjustable feet (4)
DETERGENT DISPENSER
Compartment 1: Pre-wash detergent
(powder)
Compartment 2: Washing detergent
(powder or liquid)
Compartment 3: Additives (fabric softeners,
etc.)
The fabric softener must not exceed the “MAX”
level.
! Use powder detergent for white cotton
garments, for pre-washing, and for washing at
temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1
2
3
1.
3.
2.
5.
4.
6.
7.
Maximum load 7 kg
Power input in o mode 0,5 W / in left-on mode 8 W
Detergents and
additives
Recommended
detergent
Programme
Available tem-
peratures
Max. spin
speed
(rpm)
Drying
Max. load
for wash
cycle (kg)
Max. load
for drying
cycle (kg)
Duration
(Minutes)
Prewash Main Softener
Powder Liquid
1 2 3
MIXED
- 40°C
1000
4,5 4,5
The duration of the programme is shown on the display.
-
-
COTTON 2
- 60°C
1400
7 5 -
SYNTHETICS 3
- 60°C
1200
4,5 4,5 -
RAPID 30’
- 30°C
800 - 3,5 - -
-
SPORT
- 40°C
600
4 4 -
-
WASH&DRY 45 min 30°C 1400 1 1 -
-
WASH & DRY 90
min
30°C 1200
2 2 -
-
SPIN & DRAIN *
- 1400 7 5 - - - - -
RINSE & SPIN - 1400 7 5 - -
- -
WHITE
- 90°C
1400
7 5
(90°)
ECO COTTON 1
- 60°C
1400
7 5 -
WOOL
- 40°C
800
2 2 -
-
DELICATES
- 30°C
0
1 1 -
-
COLOUR 15° 15°C 1000 4,5 4,5 -
-
Required dosage Optional dosage
1. On/O button
2. Programme selector
3. Start/Pause button
4. Temperature button
5. FreshCare+ button
6. Dry Only button / Lock button
7. Drying settings button
8. Display
9. Start delay button
10. Spin speed button
21
9
3
4
10
6
5
7
8
DISPLAY INDICATORS
Washing phase
Indicates washing phase of the cycle
Drying phase
FreshCare+ activated
Key lock activated
Drying only
Timer drying mode
Drying automatic levels
Start delay activated
Door locked
* Select the programme and set the spin speed to “0“ to empty only.
The cycle duration indicated on the display or in the manual is an estimated time calculated for
standard conditions. The actual cycle time may vary in relation to a number of dierent factors,
such as inlet water temperature and pressure, ambient temperature, quantity of detergent, size
and type of load, load balancing and any additional optional functions selected.
6th Sense - the sensor technology adapts water, energy and programme duration to your
wash load.
For wash programmes with temperatures above 50°C, we recommend using powder
detergent rather than liquid, and following the directions given on the detergent package.
For all Test Institutes
1) Test programme in compliance with standard EN 50229 (Wash): select the “ ”
programme with a temperature of 60°C.
2) Long cotton programme: set the “ “ programme with a temperature of 40°C.
3) Synthetic program along: set the “ “ programme with a temperature of 40°C.
Test programme in compliance with standard EN 50229 (Drying): select the “ “ wash
programme and set the drying level to “ ”, for both loads. The rst drying cycle must be
carried out with the nominal load.
Loading ...
Loading ...
Loading ...