Loading ...
Loading ...
Loading ...
Instructions for the installer
88
12.3 Positioning the oven
Never use the oven door to lever the oven into place when fitting. Avoid exerting
too much pressure on the oven door when open.
It is recommended to install the oven with the help of a second person.
The base on which the oven is resting must be complete as shown in the
illustrations below.
If the oven is flush mounted, it is
necessary to leave at least 1 cm of
space under the large oven door in
order to allow it to open completely.
The oven is designed for mounting into any piece of furniture as long as it is
heat-resistant. For positioning, follow the dimensions of the counter indicated in
figure 1-2-3 and the operational dimensions of the oven indicated in figure 4-5.
To secure the appliance to the counter, screw in 6 screws through the holes in
the frame indicated in figure 6.
When installed underneath a hob, the panel must be at least 40 mm thick. You
should nevertheless refer to the instructions in the hob manual.
Loading ...
Loading ...