Loading ...
Loading ...
Loading ...
Do not transport the remote control together
with metal objects or electronic devices.
In the case of interference, the vehicle can also
be unlocked and locked from the outside with‐
out remote control, refer to page 41.
For US owners only
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communication
Commission regulations. Operation is gov‐
erned by the following:
FCC ID:
▷ LX8766S.
▷ LX8766E.
▷ LX8CAS.
▷ LX8CAS2.
▷ MYTCAS4.
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
▷ This device may not cause harmful inter‐
ference, and
▷ this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modifications or changes to
these devices could void the user's authority to
operate this equipment.
Without remote control
Locking from the outside
1.
Close the driver's door from the outside.
2. Enter the vehicle via the front passenger
side and close front passenger door.
3.
Press button for central locking
system.
Vehicle is locked.
4. Unlock the front passenger door via the
lever in the door frame, refer to page 42.
5. Exit the vehicle on the front passenger
side:
Make sure that the remote control is not in
the vehicle.
6. Close the front passenger door.
Unlocking from the outside
The driver's door can be opened at the door
lock using the integrated key, refer to page 36.
The alarm system is set off when the vehicle is
opened using the door lock.
In order to terminate this alarm, unlock vehicle
with the remote control or establish radio-
ready state, if needed, through emergency de‐
tection of the remote control, refer to page 37.
From the inside
Unlocking and locking
Via the buttons for the central locking system.
▷
By pressing the button, the vehicle
is locked with the doors closed.
Seite 41
Opening and closing Controls
41
Online Edition for Part no. 01 40 2 957 072 - X/14
Loading ...
Loading ...
Loading ...