Loading ...
Loading ...
Loading ...
25
Keep the air hose as short and free of cur-
ves as possible to avoid bottlenecks.
Air-conditioning with installation
Ifrequired,yourappliancecanbeinstalledsemi-
permanently(Fig.8).
Proceedasfollows:
• Drilla134 mmdia. holeinanoutsidewall
or through a window pane, respecting the
heightsshowning.9.
• Fittheangeaccessory(S)providedinthe
holefollowingtheindicationsings.10,11
and12.
inthewindowpane
inthewoodenkickboardofaFrenchwindow
inthewall:youarerecommendedtoinsulate
thesectionofwallusingsuitableinsulation.
• Fittheairexhausthose(K)inthehou-
sing at the back of the appliance (g.
1).
• Fittheendofthehosetotheange(S).
Whenthehoseisnottted,theholecan
beclosedwiththeangecap.
• Removethecapatthebackoftheap-
pliance (G) and replace with the drain
hosepluscap(U)asshowningure6.
Thisenablesthecondensatetobedrai-
nedmoreeasilyattheendoftheseason.
Seethesection:“ENDOFSEASONOPE-
RATIONS”.
Keep the air hose as short and free of
curves as possible to avoid bottlenecks.
When installing the air conditioner semi-
permanently, you should leave a door slightly
open, as little as 1 cm, to guarantee correct
ventilation.
8
10
11
12
9
6
7
Loading ...
Loading ...
Loading ...