CPTW3005 User Manual

Loading ...

127

Presentation tools

This application will appear in the Windows

notication area once it starts. You can quit the

application from your computer by selecting “Quit” on

the menu.

・"Live Viewer Lite for USB" cannot be

used if MEMORY ACCESS item of IWB menu

is set to COMPUTER.

• The “LiveViewer” (refer to the

Network Guide) and this application cannot be used at the same time. If

you connect your computer to the projector by using a USB cable while the

“LiveViewer” is running, the following message will be displayed.

• Depending on the software installed on your computer, images on your

computer cannot be transferred using “LiveViewer Lite for USB”.

• If any application software having the rewall function is installed into your

computer, make the rwall function invalid with following the user's manual.

• Some security software may block image transmission. Please change the

security software setting to allow the use of "LiveViewer Lite for USB".

• When the audio input from USB TYPE B is selected, if the sound level is still

low even after raising the volume level in the projector to the maximum, check

whether your computer outputs audio and raise the volume level accordingly.

• If the computer in use is equipped with HDMI port, the audio setting will be

changed and sound interruption or noise may occur when the HDMI cable is

connected or disconnected during USB Display. Restart USB Display for this

case.

• Image distortion or sound interruption may occur when “LiveViewer” is

connected to LAN (wireless or wired) during USB Display. The above decline in

performance is noticeable especially when multiple computers are connected to

“LiveViewer”.

NOTE

USB Display(Windows

computer) (continued)

Loading ...

Hitachi CPTW3005 Ultimate Short Throw Interactive Lcd Data Projector