Loading ...
Loading ...
Loading ...
Mains hair clipper instructions
12
OIL
The blades of your new clipper should be oiled after every haircut. Simply place a few
drops of Wahl Clipper Oil on the blades at points A and B. Use only the Wahl Clipper Oil
included in the pack. Due to the high speed of your Wahl Clipper, the correct type of oil
must be used. Do not use hair oil, grease or any oil mixed with kerosene or any solvent,
as the solvent will evaporate and leave the thick oil, slowing down the blades. Wahl
Clipper Oil is a very thin, natural oil which will not evaporate and will not slow down the
blades.
POWER SCREW
(Not found on all models of Wahl Clippers)
Your clipper has a power screw; it has been adjusted for peak efîš¿ciency before leaving
the factory. However, if voltage in your home is low, you may need to readjust it.
To adjust power, use the plastic brush, screwdriver or a thin coin to turn the power screw
in a clockwise direction until he arm strikes the coil making a noise. Then slowly turn the
power screw out (counter clockwise), just until noise stops. Then about a quarter turn
more, This is the maximum power setting.
Loading ...
Loading ...
Loading ...