Loading ...
Loading ...
Loading ...
En
15
Types of effects
REVERB
1
This function adds a reverberation effect to the input sound.
! Lowering the channel faders and cutting the input volume leaves a
delay sound.
Level
Direct sound
Early reflected sound
Reverberations
1%
100%
Time
BEAT c, d buttons
(parameter 1)
Sets the extent of the reverberation effect, from
1 – 100
%.
TIME control (parameter 2)
Use this to set the degree of the reverb effect.
1 – 100 (%)
LEVEL/DEPTH control
(parameter 3)
Sets the balance between the original sound and the
effect sound.
TRANS
The sound is cut according to the beat fraction set with the [BEAT c, d]
buttons.
Cut Cut
1/1 beat
Time
BEAT c, d buttons
(parameter 1)
Sets the beat fraction between 1/16 and 16 with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Sets the effect time.
10 to 16000 (ms)
LEVEL/DEPTH control
(parameter 3)
Sets the duty ratio and balance between the original
sound and effect sound.
FLANGER
A 1-cycle flanger effect is produced according to the beat fraction set
with the [BEAT c, d] buttons.
Short delay
Cycle
Time
BEAT c, d buttons
(parameter 1)
Sets the effect time between 1/16 and 64 beats with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Use this to set the cycle by which the flanger effect
moves.
10 to 32000 (ms)
LEVEL/DEPTH control
(parameter 3)
The further the control is turned clockwise, the more
the effect is stressed.
When turned all the way counterclockwise, only the
original sound is output.
PITCH
Changes the pitch of the source sound.
BEAT c, d buttons
(parameter 1)
Sets the pitch of the effect sound.
-50 to 100 (%)
TIME control (parameter 2)
Sets the pitch of the effect sound.
-50 to 100 (%)
LEVEL/DEPTH control
(parameter 3)
Sets the pitch of the effect sound. Turn fully left to
return to the original sound.
ROLL
The sound being input at the point when the [ON/OFF] button is pressed
is recorded, and the recorded sound is output repeatedly according to
the beat fraction set with the [BEAT c, d] buttons.
Effect turned on
Repeated
Original
1/1 roll
BEAT c, d buttons
(parameter 1)
Sets the effect time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Sets the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Sets the balance between the original sound and
ROLL.
VINYL BRAKE
The playback speed of the input sound changes according to the beat
fraction set with the [BEATc, d] buttons, slowing steadily, until play-
back stops.
BEAT c, d buttons
(parameter 1)
Sets the effect time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Sets the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Sets the playback speed of the input sound. Turn fully
left to return steadily to the original sound. Turn right
from the fully left position to slow playback steadily,
resulting in an effect that stops playback.
HELIX
The sound being input at the point when the [ON/OFF] button is pressed
is recorded, and the recorded sound is output repeatedly according to
the beat fraction set with the [BEAT c, d] buttons.
Turn the [LEVEL/DEPTH] control right from the fully left position to
record the input sound. Also, turning it fully right fixes the output sound.
Altering the effect time changes the pitch of the sound recorded up to
that point.
BEAT c, d buttons
(parameter 1)
Sets the effect time between 1/16 and 16 beats with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Sets the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Sets the ratio of sound overlay. Turn fully left to return
to the original sound. Turn right from the fully left
position to record the input sound in its default state
1 When [1] to [4] is selected with the effect channel selector switch,
the effect sound cannot be monitored even if the [CUE] button of the
selected channel is pressed.
Loading ...
Loading ...
Loading ...