Loading ...
Loading ...
Loading ...
Preparation/Basic “Quick Start Guide”
19
(ENG) SQT1310
2 Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
C Focus indication
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
• Once the subject is in focus, the focus indication is
displayed. (When the subject is not in focus, the
indication flashes.)
3 Press the shutter button fully (push it in
further), and take the picture.
•
Be careful not to move the camera when you press the shutter button.
• When the image is correctly focused, the picture will be taken, since the [Focus/
Release Priority] is set initially to [FOCUS].
∫ Adjust the angle of the monitor
•
Be careful not to catch your finger, etc. in the monitor.
• When adjusting the angle of the monitor, be careful not to
apply too much force, as this may cause damage or
malfunction.
• When not using this unit, close the monitor completely back to the
original position.
• Return the monitor to its original position when attaching a tripod/
monopod.
• Use of a tripod/monopod may limit the maximum angle to which
the monitor can be adjusted, depending on the type of the tripod/
monopod.
• The [Auto Review] function displays the picture you have
just taken.
• To display the picture in Playback Mode, press [(].
11
Check the picture you have taken
6060603.53.53.5
AB
C
1/981/981/981/98
DMC-GX85KBody_PP-SQT1310_eng.book 19 ページ 2016年3月25日 金曜日 午後5時13分
Loading ...
Loading ...
Loading ...