Loading ...
Loading ...
Loading ...
en
32
Fault finding
Resolving minor problems
yourself
Experience has shown that you can
resolve most problems that arise during
normal daily usage yourself, without
having to call out a service engineer. Not
only does this save costs, but it also
means that the appliance is available for
use again that much sooner. The following
list of common occurrences and their
remedies should help you identify the
causes of most problems.
Problems ...
... On Switching On
Wrong Language Selected
The following steps return you to the
language selection:
1. Switch off the device.
2. Switch on the device. Press the button
M/OK
2 repeatedly until the
language selection appears in the
display.
3. Select the language and confirm your
selection.
The device does not start.
A fuse in the house is defect.
The device is not properly
plugged in.
The device’s door is not closed
properly.
The device’s door was closed
without first starting the
programme.
Some time after the programme
start a continuous acoustic signal
sounds.
The device does not draw water.
When the door is opened the
message “Check water supply”
is displayed.
Mains water tap is not opened.
Open the tap fully and press the
button M/OK 2 of the device.
Then close the device’s door for
the programme to resume.
Filter of the water inlet hose is
blocked.
Switch off the device and
disconnect it from the power
supply. Close the mains water tap.
Clean the filter located at the
connection of the Aquastop or the
inlet hose. Finally, restore the
power supply. Open the mains
water tap, switch on the device,
and close the door for the
programme to resume.
Attention
Please remember: Repairs
may only be carried out by
professionals. Unprofessional
repairs can cause significant
damage and danger to the
user.
Loading ...
Loading ...
Loading ...