Loading ...
Loading ...
Loading ...
en
19
Adjusting the appliance
Switching on the appliance
Turn on the tap fully.
Switch on the appliance with the main
switch 1 and, if required, top up with
salt and rinse aid (see chapters “Filling
with salt”, “Filling with rinse aid”). The
main menu is then displayed.
Auto Wash
<>
After switching on the Main Menu shows
the programme “Auto Wash”.
Setting the Programme
From the programme “Auto Wash” in the
Main Menu you can select among the
following programmes:
“Auto Super Wash” –
“Auto Wash” –
“Auto Delicate Wash” –
“Short Rinse” –
“Prerinse Only”.
Set the desired programme by using
the buttons – or +
3 .
The auto programmes “Auto Super Wash”,
“Auto Wash”, and “Auto Delicate Wash”
automatically match the programme to the
amount and soil level of the dishes. This
keeps the energy and water consumption
as low as possible.
Using the following programme overview
you can select the appropriate programme
for the type, amount, and soil level of the
dishes.
auto 3in1
The use of so-called combined detergent
products may make the use of rinse aid
and/or salt unnecessary.
There are currently several types of
combined detergent products available.
3in1: They contain detergent, rinse aid
and salt function.
2in1: They contain detergent and rinse
aid or salt function.
>>> Always check the type of detergent
or combined product which you
are using!
Always follow the operating instructions
or the information on the packaging.
The rinse programme is automatically
adjusted in order to obtain the best
possible rinsing and drying result.
Observe the following important
information if using combined cleaning
products:
Regeneration salt is not required up to
a water hardness of 21 dH (37 fH,
26 Clarke, 3.7 mmol/l) only. No other
settings on the appliance are required.
Salt is still required if the water
hardness is above 21 dH (37 fH,
26 Clarke, 3.7 mmol/l). Fill the salt
dispenser with salt
25 .
The factory-set hardness setting
“hardness auto” ensures that the water
softening system is set optimally by
the optical limescale sensor even if
combined cleaning products are used.
Loading ...
Loading ...
Loading ...