Loading ...
Loading ...
Loading ...
20
CHAPTER 5
SEWING
Stitch selection
Select the stitch pattern before you start sewing.
This sewing machine can sew five different
stitches by following the simple steps below:
Four-thread overlock stitch
Use all four threads and two needles for
producing four-thread overlock stitches.
Use: Produces strong seam. Ideal for sewing knits
and wovens.
Three-thread overlock stitch
5 mm (3/16 inch)
Use three threads and the left needle, producing 5
mm (3/16 inch) seams.
Use: For overlock stitching on suits, blouses,
slacks, etc. Ideal for medium to heavy materials.
NOTE:
Remove the right needle when sewing this overlock
stitch.
Three-thread overlock stitch 2.8 mm
(7/64 inch)
Use three threads and the right needle, producing
2.8 mm (7/64 inch) seams.
Use: For overlock stitching on suits, blouses,
slacks, etc. Ideal for fine to medium materials.
NOTE:
Remove the left needle when sewing this overlock
stitch.
Narrow overlock stitch 2.0mm (5/64
inch) and
Rolled hemming stitch 2.0mm (5/64
inch)
Use as decorative or finishing stitch. See "Narrow
overlock/ Rolled hemming stitch" in this chapter
for details.
NOTE:
You can use the optional accessory foot for even more
varieties of stitches. See CHAPTER 8 for details.
Test sewing
Test-sew before you start sewing.
1. Set all the thread tension to "4".
2. Thread the machine and pull all threads out
about 15 cm (6 inches) behind the presser
foot.
3. Place a piece of scrap material under the
presser foot for test sewing.
NOTE:
Always lift the presser foot before placing the fabric
under it. You cannot start sewing by just running the
fabric under the foot without lifting the presser foot.
Loading ...
Loading ...
Loading ...