Loading ...
Loading ...
Loading ...
Cleaning en
7
DCleaning
Cl eani ng
Do not use high-pressure cleaners or steam jet
cleaners. Only clean the appliance when it is switched
off. Switch the appliance off at the main switch – the
operating indicator light will go out.
Appliance exterior
Wipe the appliance with water and a little detergent.
Then dry it with a soft cloth.
Caustic or abrasive cleaning products are not suitable.
If a caustic or abrasive substance comes into contact
with the frontage, wash it off immediately with water.
Stainless steel surfaces
Always remove any spots of limescale, grease,
cornflour and egg white immediately. Corrosion can
form under such spots. Clean the appliance using water
and a little detergent. Then dry the surface with a soft
cloth.
Appliances with glass fronts
Clean the glass front with glass cleaner and a soft cloth.
Do not use a glass scraper.
Appliance interior
Stainless steel surfaces
Always remove any spots of limescale, grease,
cornflour and egg white immediately. Corrosion can
form under such spots. Clean the appliance using water
and a little detergent. Then dry the surface with a soft
cloth.
Anti-slip mat
You can remove the the anti-slip mat to clean it. Clean
using detergent.
3Trouble shooting
Tr oubl e s hoot i ng
Faults often have simple explanations. Please read the following notes before calling the after-sales service:
Any repair work must only be carried out by qualified
experts. Incorrect repairs to your appliance may present
considerable risks for the user.
The tableware or food does not heat up. Check:
■ Whether the appliance is switched on by pressing the main switch (operating indi-
cator lights up)
■ Whether there is a power cut
The tableware or food does not get warm enough. It may be that:
■ The tableware or food has not been warmed for long enough
■ The drawer was open for a long time
■ The drawer was not adequately pre-heated
■ The ventilation opening was blocked by tall items of tableware or stacks of plates
The operating indicator light does not light up. The indicator light is defective. Consult the after-sales service.
The fuse in the fuse box has blown. Pull out the mains plug and consult the after-sales service.
Loading ...
Loading ...
Loading ...