Loading ...
Loading ...
Loading ...
Cleaning and maintenance
86
4.5 Vapor Clean (on some models
only)
Preliminary operations
Before starting the Vapor Clean cycle:
• For Multifunction models: Completely
remove all accessories from inside the
oven.
• Remove the self-cleaning panels (see
“Removing self-cleaning panels and
rack/tray support frames (fitted only to
some models)”).
• Pour approx. 40 cc of water onto the
floor of the oven. Make sure it does not
overflow out of the cavity.
• For models with pizza stone: Remove
all accessories from the inside of the
oven, except the rack/tray support
frames.
• Place a tray on the first shelf.
• Pour approximately 40 cc of water into
the tray. Make sure it does not overflow
out of the tray.
Vapor Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the inside of the oven very
easily. The dirt residues are
softened by the heat and water
vapour for easier removal
afterwards.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Carry out assisted oven cleaning
operations only when the oven is cold.
The cover should be placed in the
housing on the base of the oven in
place of the pizza stone.
Loading ...
Loading ...
Loading ...