Loading ...
Loading ...
Loading ...
30_ maintaining your washer
maintaining your washer
PURE CYCLE
TM
Pure Cycle is a self-cleaning cycle that removes mold that may occur
inside the washing machine.
1. Press the Power button.
2. Select the Pure Cycle
TM
course.
• Once the Pure Cycle
TM
course is selected, the only function
that can be set is Delay Start.
3. Press the Start/Pause button.
• If you press the Start/Pause button, Pure Cycle begins.
• Using Pure Cycle, you can clean the drum without using a cleansing agent.
• Never use Pure Cycle when laundry is in the washing machine. This may cause damage to
the laundry or a problem with the washing machine.
The Pure Cycle Auto Indicator Function
• If the “Pure Cycle” is lit after a wash, it indicates that
tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power
on, and clean the drum by running Pure Cycle.
• If you do not run Pure Cycle, the “Pure Cycle
TM
”
indicator turns o. However, the “Pure Cycle
TM
”
indicator will light again after two washes. Not running Pure Cycle at this point will not cause
a problem with the washing machine.
• Although the Pure Cycle Auto Indicator appears once a month or so, the frequency may dier
depending on the number of times the washing machine is used.
WA50F9A7D*
WA50F9A8D*
WA50F9A6D*
CAUTION
F900A WASH_WA50F_USER MANUAL_DC68-03133H-03_EN.indd 30 2013-12-23 19:17:03
Loading ...
Loading ...
Loading ...