Loading ...
Loading ...
Loading ...
When the refrigerator is powered
on, all the icons of the control panel
will light up for 3 seconds, and a
buzzer sounds. The Child Lock is off.
And the temperature setting reverts
back to the previous setting.
You can touch this button to turn
Energy Saver mode on and off .
When you turn Energy Saver on, the
Energy Saver icon “ ” lights.
If Energy Saver is off
and the icon goes off.
The temperature of the fridge is
automatically switched to 8℃ and the
freezer to -15℃.
If you need water, please touch the
“Water” button, and the water icon
“ ” will light up. The mode is then
set.
When you touch the Ice Type button,
the cubed or crushed ice mode which
you choose will be activated, and the
Cubed “ ” or Crushed “ ” ice icon
lights up.
After the refrigerator has dispensed
about 1000 gallons of water(used the
water filter for about 6 months), the
filter icon “ ” will blink, and the
buzzer will sound 3 times, that remind
you need to replace the water filter.
“Changing the Water Filter”
“Energy Save”
Note!
The control panel will light up when
the door is open or you touch any
button.
The light will go off without touching
any button or the doors have been
closed for one minutes.
If you don’t need ice, turn the function
off to save on water and energy
consumption.(See Ice Off above.)
Filter Reset 3"
In general, you should change the
water filter every 6 months to ensure
the highest possible water quality.
Note!
If water is not dispensed or
dispensing slowly, you need to
replace the water filter because it may
become clogged.
Some areas have large amounts of
lime in their water, which causes the
water filter to clog more quickly.
First of all, you need to purchase a
new water filer. You can purchase the
new filter from the retailer where you
purchased your refrigerator or the
after-sales service system. Before that
please check that the new filter is the
same filter type as before that can be
correctly used in your refrigerator.
After you change a new water filter,
ensure to touch and hold the button
“Eco” for 3 seconds to reset the filter.
When you replace the water filter,
some water may leak from the filter
and lines. Please let the water flow in
a pan, and wipe up any leakage that
may have occurred.
You can the "Cubed" or
"Crushed" option to choose the t
of Ice to be dispensed. You can touch
the "Water" button to activate the
water mode.
press
ype
16
Loading ...
Loading ...
Loading ...