Subaru 2020 Impreza Sedan

Owner's Manual - Page 212

For 2020 IMPREZA SEDAN.

PDF File Manual, 496 pages, Read Online | Download pdf file

2020 IMPREZA SEDAN photo
Loading ...
Loading ...
Loading ...
(210,1)
北米Model "A1380BE-B" EDITED: 2019/ 12/ 16
! Auto-on/off wiper-linked headlights
(models with auto on/off headlights)
S03AH0106
While the light control switch is in the
“AUTO” position, the headlights will auto-
matically turn on when the windshield
wipers operate several times. The head-
lights will automatically turn off when the
wipers stop.
NOTE
The ON/OFF setting of this function can
be changed by a SUBARU dealer.
Consult your SUBARU dealer for de-
tails.
! Welcome lighting function (if
equipped)
S03AH0103
The welcome lighting function turns on the
low beam headlight for smooth approach-
ing to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
. The light control switch is in the “AUTO”
position.
. It is dark enough to turn on the auto on/
off headlights.
When approaching:
While the welcome lighting function is
activated, the low beam headlights, instru-
ment panel illumination, headlights, park-
ing lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights will automatically illuminate when
unlocking the doors and the rear gate (5-
door models) by using the remote keyless
entry system.
The lights will remain illuminated for 30
seconds
*1
and then turn off. However, if
any of the following operations is done, the
lights will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
. The ignition switch is turned to the “ON”
position.
When exiting:
While the welcome lighting function is
activated, the low beam headlights, instru-
ment panel illumination, headlights, park-
ing lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights will remain illuminated even when
either of the following operation is done.
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The lights will turn off under any of the
following conditions.
. 3 minutes have passed since the lights
were illuminated by the welcome lighting
function.
. 30 seconds have passed since the door
is opened and closed.
*1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
lights remain on by the welcome lighting
function can be changed by a SUBARU
dealer. Contact your SUBARU dealer for
details.
Instruments and controls/Light control switch
3-66
Loading ...
Loading ...
Loading ...