Loading ...
Loading ...
Loading ...
(117,1)
北米Model "A1380BE-B" EDITED: 2019/ 12/ 16
button (5-door models) twice.
3. After a chirp sounds once, press the
trunk opener button (sedan)/rear lock
button (5-door models) four times.
4. After a chirp (ding) sounds once, press
the trunk opener button (sedan)/rear lock
button (5-door models) six times.
5. After a chirp (ding) sounds once, press
the trunk opener button (sedan)/rear lock
button (5-door models) eight times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the chirp
starts sounding intermittently.
7. All doors will be unlocked and locked.
Then the PIN code will be registered.
NOTE
. Press the trunk opener button (se-
dan)/rear lock button (5-door models)
ten times to enter “0”.
. Change the PIN code frequently to
protect your vehicle from theft.
. If you have lent your vehicle to
another person, confirm that the PIN
code has not been changed or deleted.
If the PIN code has been changed or
deleted, reregister a new PIN code.
. If you make an error during the
registration procedure, press the “
”
or “
” button on the access key fob.
Then, start over from the procedure
described in “Preparation for register-
ing a PIN code”.
. To protect your vehicle from theft,
you cannot register a string of the same
five numbers together, such as
“00000”, nor “12345” as a PIN code.
. Do not register your vehicle license
plate number or simple numbers such
as “11122” or “12121” as a PIN code.
Doing so will increase the risk of
vehicle theft.
. When you try to register “22222”, the
registered PIN code will be deleted. You
cannot unlock the doors by PIN Code
Access until a new code is registered.
. After registering a new PIN code,
make sure that you can unlock the
doors using the PIN code.
. The PIN code cannot be deleted
while the keyless access function is
disabled by operating the access key
fob.
. Reregister the PIN code in the fol-
lowing case.
– When you forget the PIN code
– When you want to change the PIN
code
! Unlocking
S02AP2103
Perform steps 1 to 5 described in “Regis-
tration for a PIN code”.
NOTE
. You cannot unlock by PIN Code
Access in the following cases.
– When the access key fob is within
the operating ranges
– When the ignition switch is in the
“ACC” or “ON” position
. If you make an operation error dur-
ing the unlocking procedure, start over
with the unlocking procedure after
waiting for 5 seconds or longer.
. To protect your vehicle from theft, a
buzzer will sound if incorrect PIN codes
are entered five times continuously. If
this occurs, you cannot unlock the
doors by PIN Code Access for 5
minutes.
& Power saving function
S02AP23
The keyless access function will be dis-
abled in the following cases to protect the
access key fob battery and the vehicle
battery.
. Case 1: When the keyless access
function and the remote keyless entry
system have not been used for 2 weeks
or longer while all doors are locked
Operate one of the following items to
recover the keyless access function:
– Unlock the doors by operating any
procedure other than gripping the front
– CONTINUED –
Keys and doors/Keyless access with push-button start system
2-13
2
Loading ...
Loading ...
Loading ...