Loading ...
Loading ...
Loading ...
Installing the wine conditioning unit
74
Aligning the wine conditioning unit to
taller furniture doors
If adjacent furniture doors are taller
than the wine conditioning unit door,
the wine conditioning unit can be
aligned to the adjacent furniture doors
using a filler panel.
A bracketis required to secure the
filler panel, which is available from Miele
Technical Service or from your dealer.
The filler panel can be fitted above or
below the wine conditioning unit as re-
quired:
To avoid damaging the wine condi-
tioning unit, the ventilation grille must
be positioned precisely in front of the
vent outlet! If you wish to fit a trim
across the bottom of the wine condi-
tioning unit, make sure it provides
adequate ventilation.
The filler panel must be made exactly
to measure.
Secure the bracketto the back of
filler panel.
Pull the wine conditioning unit as far
as you need to out of the niche so
that you can tilt it towards you.
Loosely screw the bracket with the
filler panel to the wine conditioning
unit.
Align the filler panel to the door of the
wine conditioning unit over the slot-
ted holes to give a flush finish.
Loading ...
Loading ...
Loading ...