Loading ...
Loading ...
Loading ...
Feature lighting
35
The selected brightness is saved and
the temperature reappears in the dis-
play.
As soon as the appliance door is
closed, the set brightness for the fea-
ture lighting takes effect. When the ap-
pliance door is opened, the interior
lighting returns to its normal level.
Lighting duration of the feature light-
ing
The lighting duration for the feature
lighting is set to 30minutes at the fac-
tory.
The lighting duration can be set to 30,
60, 90 minutes, up to 00 (unlimited). The
feature lighting will have the brightness
setting you have selected previously.
Open the appliance door.
Touch the On/Off sensor for the fea-
ture lighting so that it is highlighted in
yellow.
Touch the sensor for the feature light-
ing again (approx. two seconds), until
theflashes in the display.
Use the sensors for altering the tem-
perature (and) to set the feature
lighting duration.
The times (in minutes) will flash in the
display.
By touching the sensors
– the lighting duration is reduced by 30
minutes
– the lighting duration is increased by
30 minutes.
Touch the OK sensor to confirm your
choice.
The selected lighting duration is saved.
The temperature reappears in the dis-
play.
The set lighting duration starts again
whenever the appliance door is opened
and closed.
Caution! Laser beam class 1M
Do not remove the lighting covers!
If the covers are damaged or need to
be removed due to damage, do not
use optical instruments (magnifying
glass or similar) to look at the light-
ing.
Loading ...
Loading ...
Loading ...