User Manual Samsung LU32R590CWNXZA 32" ViewFinity UR59 4K UHD Curved Monitor

• User Manual - (English)

• Warranty - (English)

Table of contents

• Preparations
• Connecting and Using a Source Device
• Picture
• System
• Troubleshooting Guide
• Specifications

Preparations

Parts

Control Panel

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Direct Key guide

The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes.

• UP/DOWN: Adjust Brightness, Contrast, Eye Saver Mode.
• LEFT/RIGHT: Adjust Volume.
• PRESS(ENTER): Display Function Key Guide.

To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again.

UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied

Icons	Description
	Selects to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has been changed. When PBP Mode is available, the position of left and right sides of screen can be changed by using this key.
	Selects by moving the JOG button in the function key guide screen. The OSD (On Screen Display) of your Monitor's feature appears. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable/Disable: To lock/unlock the OSD control, press the LEFT button for 10 seconds when the main menu displayed. If the OSD control is locked, Brightness and Contrast can be adjusted. PBP is available. Eye Saver Mode is available. Information can be viewed.
	Selects by moving the JOG button in the function key guide screen. Press the button when configuring settings for the PBP function is required.
	Selects to turn the Monitor off by moving the JOG button in the function key guide screen.

When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below.

Configuring Eye Saver Mode, Brightness and Contrast from the Initial Screen

Adjust the Brightness, Contrast and Eye Saver Mode by moving the JOG button.

The displayed image maydifferdepending on the model.

Eye Saver Mode

Brightness

• This menu is not available when m AGicBright is set to Dynamic Contrast mode.
• This menu is not available when Eye Saver Mode is enabled.

Contrast

• This menu is not available when m AGicBright is in Cinema or Dynamic Contrast mode.
• This menu is not available when Game Mode is enabled.
• This menu is not available when PBP Mode is set to On.

Changing the Volume setting

You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed

The displayed image maydifferdepending on the model.

If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers. Set the in put volume for the input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the product.

• What is Auto Mute?

The function mutes the audio to improve sound effect when there is sound noise or when the input signal is weak, usually due to a problem with the volume of an input device.

To activate the Mute function, access the Volume control screen, then use the JOG button to move the focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease the Volume.
Types of Ports

The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product.

Adjusting the Product Tilt

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality

• The monitor tilt can be adjusted.
• Hold the lower part of the product and adjust the tilt carefully.

Anti-theft Lock

• An anti-theft lock allows you to use the product securely even in public places.
• The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.

To lock an anti-theft locking device:

1. Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2. Put one end of the cable through the loop on the other end.
3. Insert the locking device into the anti-theft lock slot at the back of the product.
4. Lock the locking device.

• An anti-theft locking device can be purchased separately.
• Referto the userguide provided with your anti-theft locking device for details.
• Anti-theft locking devices can be purchased at electronics retailers or online.

Connecting and Using a Source Device

Read below before installing the monitor.

1. Check the shapes of both ends of the cables that came with the monitor, and check the shapes and positions of the matching ports on the monitor and external devices.
2. Before connecting signal cables, disconnect the power cables for the monitor and external devices from the power outlet to prevent device damage from a short circuit or overcurrent.
3. After connecting all signal cables, connect the power cables for the monitor and external devices to the power outlet.
4. Read the user manual to familiarize yourself with the monitor functions, precautions, and proper use, before using the installed monitor.

Connecting and Using a PC

Connection Using the HDMI Cable

• To display 3840 x 2160 @ 60 Hz, use an HDMI cable that supports 3840 x 2160 @ 60 Hz to connect HDMI. Make sure that the graphics card of the HDMI source supports 3840 x 2160 @ 60 Hz.
• When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use an HDMI cable other than provided by Samsung, the image quality may be degraded.

Connection Using the HDMI-DVI Cable

• The audio function is not supported if the source device is connected using the HDMI-DVI cable.
• The optimum resolution may not be available with an HDMI-DVI cable.

Connection Using the DP Cable

• To display 3840 x 2160 @ 60 Hz, use a DP cable that supports 3840 x 2160 @ 60 Hz. Make sure that the graphics card of the DP source supports 3840 x 2160 @ 60 Hz.

Connecting to Headphones

• Use headphones when activating sound with an HDMI-HDMI or DP cable.
• The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type

Connecting the Power

1. Connect the power plug to the AC/DC adapter.
2. Connect the AC/DC adapter cable to the DC 19V port on the back of the monitor.
3. Plug the AC/DC adapter into the power outlet.
4. Press the JOG button on the back of the monitor to turn it on.

• The input voltage is switched automatically.

Tidying Up the Connected Cables

Driver Installation

• You can set the optimum resolution and frequency for this product by installing the corresponding drivers.
• To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com.

Setting Optimum Resolution

An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.

Select a language on the product and change the resolution on your PC to the optimum setting.

• If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again.
• The optimum resolution can also be selected in Control Panel on your PC.

Picture

The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

SAMSUNG MAGIC Bright

This menu provides an optimum picture quality suitable for the environment where the product will be used.

• This menu is not available when Game Mode is enabled.
• This menu is not available when Eye Saver Mode is enabled.
• Not available when PBP Mode is set to On.

You can customize the brightness to suit your preferences

In PC mode

• Custom: Customize the contrast and brightness as required.
• Standard: Obtain a picture quality suitable for editing documents or using Internet.
• Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
• Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.

In AV mode

When the external input is connected through HDMI/DP and PC/AV Mode is set to AV, has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can select Custom which automatically recalls your personalized picture settings.

• Dynamic: Select this mode to view a sharper image than in Standard mode.
• Standard: Select this mode when the surroundings are bright. This also provides a sharp image.
• Movie: Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
• Custom: Select this mode when you want to adjust the image according to your preferences.

Brightness

You can adjust the general brightness of the picture. (Range: 0-100)
A higher value will make the picture appear brighter.

• This menu is not available when m AGicBright is set to Dynamic Contrast mode.
• This menu is not available when Eye Saver Mode is enabled.

Contrast

Adjust the contrast between the objects and background. (Range: 0-100)

A higher value will increase the contrast to make the object appear clearer.

• This option is not available when MAGicBright is in Cinema or Dynamic Contrast mode.
• This menu is not available when Game Mode is enabled.
• This menu is not available when PBP Mode is set to On.

Sharpness

Make the outline of objects more clear or blurry. (Range: 0-100)
A higher value will make the outline of objects clearer.

• This option is not available when MAGicBright is in Cinema or Dynamic Contrast mode.
• This menu is not available when Game Mode is enabled.
• Not available when PBP Mode is set to On.

Color

Adjust the tint of the screen.

• This menu is not available when MAGicBright is set to Cinema or Dynamic Contrast mode.
• This menu is not available when Game Mode is enabled.
• This menu is not available when Eye Saver Mode is enabled.
• Not available when PBP Mode is set to On.
  • Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
    • Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
    • Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
    • ColorTone: Selecta colortone that best suits your viewing needs.
    • Cool 2: Setthecolor temperature to becoolerthan Cooll.
    • Cooll: Set the color temperature to be cooler than Normal mode.
    • Normal: Display the standard colortone.
    • Warml: Setthe colortemperature to be warmerthan Normal mode.
    • Warm 2: Setthe colortemperature to be warmerthan Warml.
    • Custom: Customize the colortone.
    • When the external input is connected through HDMI/DPand PC/AV Mode is set to AV, Color Tone has fourcolortemperature settings (Cool, Normal, Warm and Custom).
  • Gamma: Adjust the middle level of luminance.
    • Model / Mode2 / Mode3

SAMSUNG MAGIC Upscale

Upscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures.

• This menu is not available when Bright is set to Cinema or Dynamic Contrast mode.
• This menu is not available when Game Mode is enabled.
• Not available when PBP Mode is set to On.
  • Off / Model / Mode2
    • Comparing with Model, Mode2 has a stronger effect.

HDMI Black Level

If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality.
If this is the case, correct the degraded picture quality using HDMI Black Level.

• This function is only available in HDMI mode.
• Not available when PBP Mode is set to On.
  • Normal: Select this mode when there is no contrast ratio degradation.
  • Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation.
    • HDMI Black Level may not be compatible with some source devices.
    • The HDMI Black Level feature is only activated at a certain AV resolution, such as720P@ 60 Hzand1080P @ 60 Hz.

Eye Saver Mode

Set to an optimum picture quality suitable for eye relaxation.

TUV Rheinland “Low Blue Light Content" is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the blue light level is lower than in the default settings, and it was tested by TUV Rheinland and certified as it met the requirements of TUV Rheinland “Low Blue Light Content" standards.

Game Mode

Configure the product screen settings for game mode.
Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected.

• This menu is not available when Eye Saver Mode is enabled.
• When the monitorturns off, enters power-saving mode orchanges input sources, Game Mode turns Off even if it is set to On.
• If you want to keep Game Mode enabled all the time, select Always On.
• Not available when PBP Mode is set to On.

Response Time

Accelerate the panel response rate to make video appear more vivid and natural.

• Use Standard mode when not playing a video or game.

Picture Size

Change the picture size.

• This menu is not available when PBP Mode is set to On.

In PC mode

• Auto: Display the picture according to the aspect ratio of the input source.
• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.

In AV mode

• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts
• 16:9: Display the picture with an aspect ratio of 16:9.
• Screen Fit: Display the picture with the original aspect ratio without cutting off.
  • The function may not be supported depending on the ports provided with the product.
  • Changing the screen size is available when the following conditions are satisfied.
    • A digital output device is connected using the HDMI/DP cable.
    • The input signal is480p, 576p, 720p, or1080p and monitor can display normally (Not every model can support all of these signals.).
    • This can only be set when the external input is connected through HDMI/DP and PC/AVMode is set to AV.

System

The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality

Self Diagnosis

1. Use the function key and go to → System → Self Diagnosis

• The displayed image may differ depending on the model.

2. Select OK when the following screen is prompted.

• Review the test screen

3. Base on the test result, select Yes / No

• You will see the following screen when you select Yes

• You will see the following screen when you select No

Smart ECO Saving+

The Smart ECO Saving+ function reduces power consumption by controlling the electric current used by the monitor panel.

• This menu is not available when Eye Saver Mode is enabled.
• This menu is not available when Game Mode is enabled.
• This menu is not available when PBP Mode is enabled.
• This menu is not available when M AcucBright is set to Dynamic Contrast mode .
  • Off: Deactivate the Smart ECO Saving+ function.
  • On: The power consumption will be adjusted to save energy automatically. (The reduction of power consumption depends on the customer screen brightness condition.)

Off Timer Plus

Configuring Off Timer
Off Timer: Turn on Off Timer mode.
Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours.

• This option is only available when Off Timer is set to On.
• For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. If you do not want the timer to activate, goto an -> System -> Off Timer Pius and set Off Timer to Off.

Configuring Eco Timer
Eco Timer: Turn on Eco Timer mode.
Eco Off After: The Eco Timer can be set between 10 and 180 minutes. The product will automatically power off after the specified time has elapsed.

• This option is only available when Eco Timer is set to On.

PC/AV Mode

Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.

• Set to PC when connected to a PC.
• Set to AV when connected to an AV device.
  • Supplied forthe wide models only such as 16:9 orl6:10.
  • If the monitor (when set to HDMI, DisplayPort) is in power saving mode oris displaying the message Check Signal Cable, press then to display the On Screen Display (OSD). You can select PC or AV.

DisplayPort Ver

Select your Displayport.

• Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
• If the monitor (when set to HDMI, DisplayPort) is in power saving mode oris displaying the message Check Signal Cable, press the to display the On Screen Display (OSD). You can select 1.1 orl.21'.
• If you select 1.1, the maximum resolution of your screen drops to 2560 x1440 due to the limitations in HBR1 transmission speeds.

HDMI Mode

Select the HDMI mode to use.

• The supportable device and resolution may differ depending on its version.
• When the version is changed, the screen may blink.
• If you set the HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol.
• When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the device.
• Set the HDMI Mode to 1.4 when there is no sound output from the DVD connected to our product.
• Not available when PBP Mode is set to On.
• If the monitor(when set to HDMI) is in power saving mode or is displaying the message Check Signal Cable, press the icon to display the On Screen Display(OSD). You can select 1.4 or 2.0.

Source Detection

Select either Auto or Manual as the method to recognize input signal.

• Not available when PBP Mode is set to On.

Key Repeat Time

Control the response rate of a button when the button is pressed.

Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.

Power LED On

Configure the settings to enable or disable the power LED located at the lower part of the product.

• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.

Reset All

Return all the settings for the product to the default factory settings

Information

View the current input source, frequency and resolution.

• The displayed image may differ depending on the model.

Troubleshooting Guide

Requirements Before Contacting Samsung Customer Service Center

Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center.
Testing the Product

Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.

1. Power off both the PC and product.
2. Disconnect the cables from the product.
3. Power on the product.
4. If the message Check Signal Cable appears, the product is working normally.

• If the screen remains blank, check the PC system, video controller and cable.

Checking the Resolution and Frequency

For a mode that exceeds the supported resolution(refer to Standard Signal Mode Table), the message Not Optimum Mode will appear for a short time.

• The displayed resolution may vary, depending on the computer system settings and cables.

Check the following.

Installation issue (PC mode)

The screen keeps switching on and off.

Check the cable connection between the product and PC, and ensure the connectors are locked.

Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC.

The blank spaces found on the screen have nothing to do with the product.

Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the screen size in the HDMI or DVI settings for the graphics card.

If the graphics card settings menu does not have an option to adjust the screen size, update the graphics card driver to the latest version.

(Please contact the graphics card or computer manufacturer for further details about how to adjust the screen settings.)

Screen issue

The power LED is off. The screen will not switch on.

Check that the power cable is connected properly.

The message Check Signal Cable appears.

Check that the cable is properly connected to the product. Check that the device connected to the product is powered on.

Not Optimum Mode is displayed.
This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product.
Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (P.41).

The images on the screen look distorted.
Check the cable connection to the product.

The screen is not clear. The screen is blurry.
Remove any accessories (video extension cable, etc.) and try again.
Setthe resolution and frequency to the recommended level.

The screen appears unstable and shaky. There are shadows orghost images left on the screen.
Check that the resolution and frequency forthe PC are within the range of resolution and frequency compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode Table (P.41) in this manual and the Information menu on the product.

The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.

Screen color is inconsistent.
Change the Color settings.

The colors on the screen have a shadow and are distorted.
Change the Color settings.

White does not really look white.
Change the Color settings.

There is no image on the screen and the power LED blinks every 0.5 tol second.
The product is operating in power-saving mode.
Press any key on the keyboard or move the mouse to return to normal operating mode.

Text is blurry.
If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 orWindowslO): Goto Control Panel → Fonts →Adjust ClearType text and change Turn on ClearType.

Video playback is choppy.

Playback of high-definition large video files can be choppy. This may be because the video player is not optimized for the computer resource.

Try playing the file on another video player.

Sound issue

There is no sound.

Check the connection of the audio cable oradjust the volume.

Check the volume.

The volume is too low.

Adjust the volume.

If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program.

Video is available but there is no sound.

Sound cannot be heard if a HDMI-DVI cable is used to connect the input device.

Connect the device using an HDMI cable or DP cable.

Source device issue

A beeping sound is heard when my PC is booting.

If a beeping sound is heard when your PC is booting, have your PC serviced.

Q & A

Refer to the user manual for your PC or graphics card for further instructions on adjustment.

How can I change the frequency?

Set the frequency on your graphics card.

• Windows 7: Go to Control Panel → Appearance and Personalization → Display→Screen Resolution→Advanced settings→^ Monitor, and adjust Refresh rate under Monitor settings.
• Windows 8(Windows 8.1): Go to Settings → Control Panel → Appearance and Personalization → Display →Screen Resolution → Advanced settings → Monitor, and adjust Refresh rate under Monitor settings.
• Windows 10: Go to Settings →System → Display → Advanced display settings → Display adapter properties → Monitor, and adjust Screen refresh rate under Monitor settings.

How can I change the resolution?

• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust Resolution, and adjust the resolution.
• Windows 8(Windows 8.1): Go to Settings → Control Panel → Appearance and Personalization→ Display →Adjust Resolution, and adjust the resolution.
• Windows 10: Go to Settings → System → Display → Advanced display settings, and adjust the resolution. *

How do I set power-saving mode?

• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization→ Personalize →Screen Saver Settings → Power options or BIOS SETUP on the PC.
• Windows 8(Windows 8.1): Set power-saving mode in Settings → Control Panel → Appearance and Personalization→ Personalize → Screen Saver Settings → Power options or BIOS SETUP on the PC.
• Windows 10: Set power-saving mode in Settings → Personalization → Lock screen → Screen timeout settings → Power & sleep or BIOS SETUP on the PC.

Specifications