Loading ...
Loading ...
Loading ...
B L O O M W A S H
Works up to 5.5kg of cloth load for 12.0kg model
360° Wash
Applicable for Normal, Heavy, Bedsheet and Wash Only programs through 6th
Sense - Auto water level selection. 360° Wash gives the best in class performance
using the catalytic wash principle.
The Wash gives the best in class wash performance with approximately. 10 -30%
water, 15%-40% energy and 30% time (when hot wash is selected) depending on cloth
load and model, compared to Deep Fill Wash.
o
360 %
360° Wash uses less water in the first phase (based on cloth load), just enough
for the clothes to get soaking wet. This 'concentrated mix' of water and detergent is
heated (if Ultra Clean option is selected manually) by the in-built heater and is
recirculated using an external pump and a specially designed shower feature, back
onto the clothes, through a waterfall effect.
This action ensures activation and best performance of detergent for soil removal.
After this cycle, additional cold water is drawn to ensure clothes are optimally
submerged in water. During this period, the wash load is subjected to 360° wash.
Recirculation pump will turn ON intermittently only in Low and Medium water level.
Catalytic Deep Fill Wash
When there is more than 5.5kg of cloth load for the 12.0kg model, the
Fill Wash principle is followed.
Catalytic Deep
Conventional Deep Fill Wash (With / Without Hot Wash selection)
This wash is done when the water level is selected manually.
This is only applicable for Low and Medium water level selection.
Water is filled in a single phase.
o
The fill and wash process works the same way as the 360 Wash in 3 phases.
Phase I and Phase II use less water, just enough for clothes to get soaking wet.
If the Ultra Clean option is selected, the heater will turn on or else the cold soak function
will be turned on. In Phase III, additional cold water will be used based on the wash load.
This is applicable for High and Very High water level manual selections.
Choking Hazard
Small parts.
Not for children under 3 years.
Do not forget to re-fix the filter after cleaning.
Failure to do so will result in death.
Over a period of time, impurities in the water will reduce the water inflow
to a trickle, which in turn clogs the filter.
Pull Out
1.
Lint Filter
• Push the upper snap of the filter box
down gently and pull it to remove.
• Open the lid, clean the
lint collected inside and then
wash/flush under tap water.
• Close the lid and insert the box filter into the
corresponding slot by sliding through the
guide path in the basket. Once located, push
towards the mating slot on top to hear a click
sound (to ensure that lint filter is in position).
• Operating the washer without re-fixing the lint filter box will damage your clothes.
• It is advisable to clean the filter after every 5 washes; failing to do so may lead to
lint deposition on clothes.
3.
Unscrew the fill hose from the machine.
2.
IMPORTANT
Rotate the water supply hose to release it.
Water Inlet Pipe Filter
Inlet Valve Filter
1910
Preparation Before Washing /
Washer Maintenance
and
back into
original position.
If it continues to blink, .
.
.
Loading ...
Loading ...
Loading ...