Loading ...
Loading ...
Loading ...
73
Item Description
LAMP & FILTER
(continued)
FILTER TIME
Displays the usage time of the air lter, counted after the last
resetting. It is shown in the LAMP & FILTER menu.
Pressing the
RESET
button on the remote control or the ► button
of the projector displays a dialog.
To reset the lter time, select the OK using the ► button.
CANCEL
OK
• Reset the lter time only when you have cleaned or replaced the
air lter, for a suitable indication about the air lter.
• For the air lter cleaning, see the section Cleaning and replacing
the air lter (
105
).
• The lter time can also be checked with the Status Monitor (
24
).
FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message
when to replace the lter unit
1000h
2000h
5000h
10000h
15000h
OFF
After choosing an item except OFF, the message “REMINDER ***
HRS PASSED ....” will appear after the timer reaches the interval
time set by this feature.
When the OFF is chosen, the message will not appear. Use this
feature to keep the air lter clean, setting the suitable time according
to your environment of this projector.
• Clean the lter periodically. If the air lter becomes to be blocked
by dust or other matter, the internal temperature will rise, which
could cause malfunction, or reduce the lifetime of the projector.
• Be careful with the operating environment of the projector and the
condition of the lter unit.
PICTURE
POSITION
Using the ▲/▼/◄/► cursor buttons selects required picture
position.
The PICTURE POSITION is not changed if any of the following
cases apply.
・
There is no non-display area (black display or background display)
or it is not displayed on the screen.
• One of the following messages is displayed on the screen:
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"INVALID SCAN FREQ."
• The BLANK or TEMPLATE function is selected.
SETUP menu
(continued on next page)
Loading ...
Loading ...
Loading ...