Hitachi CPHD9950W User Manual

Loading ...

IMAGE menu

Item Description

OVER SCAN

Using the ◄/► buttons adjusts the over-scan ratio.

Small (It magnies picture)



Large (It reduces picture)

• This item can be selected only for a video and component video

signal.

• For an HDMI

, HDBaseT™, DVI-D and SDI/DIGITAL 1 signal, this

item can also be selected if either (1) or (2) applies.

(1) DIGITAL FORMAT item in the INPUT menu for selected port is

set to VIDEO.

(2) DIGITAL

FORMAT item in the INPUT menu for selected port is

set to AUTO, and the projector recognizes that it receives video

signals.

V POSITION

Using the ◄/► buttons adjusts the vertical position.

Down



• Over-adjusting the vertical position may cause noise to appear on

the screen. If this occurs, reset the vertical position to the default

setting. Pressing the

RESET

button when the V POSITION is

selected will reset the V POSITION to the default setting.

• When this function is performed on a video signal the range of this

adjustment depends on OVER SCAN (



above

) setting. You cannot

adjust when OVER SCAN is set to 10.

• This function is unavailable for a signal from the LAN, HDMI 1 / 2,

HDBaseT™, DVI-D or SDI/DIGITAL 1 port.

H POSITION

Using the ◄/► buttons adjusts the horizontal position.

Right



Left

•

Over-adjusting the horizontal position may cause noise to appear on

the screen. If this occurs, reset the horizontal position to the default

setting. Pressing the

RESET

button when the H POSITION is selected

will reset the H POSITION to the default setting.