Loading ...
Loading ...
Loading ...
Settings
89
Gentle action
With gentle action activated, drum
rotation is reduced. In this way, lightly
soiled items can be washed more
gently.
Gentle action can be activated for the
Normal and the Wrinkle-free programs.
Gentle action is switched off in the
default setting.
Temp. reduction
At high altitudes water has a lower
boiling point. Miele recommends
activating the reduce temperature
setting at altitudes of or above 6560ft
(2,000m) to prevent water from
boiling. The maximum temperature is
reduced to 176°F (80°C), even if a
higher temperature is selected.
The temperature reduction setting is
switched off in the default setting.
Maximum rinse level
The water level in the rinse can be
permanently set to the highest value.
This function is important for allergy
sufferers as it achieves excellent wash
results. The water consumption will be
increased.
The function is switched off in the
default setting.
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when a
Normal program with a temperature
setting of Hot+ or higher is selected.
Suds cooling should be activated:
– To prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– Where the drainage pipes do not
comply with DIN 1986.
Suds cooling is switched off in the
default setting.
Low water pressure
If the water pressure is below 14.5 psi
(100kPa), the program will be
canceled and the fault message
Drainage See will appear.
If the on-site water pressure cannot be
increased, activating this function will
prevent the program from being
canceled.
Low water pressure is deactivated as
standard.
Loading ...
Loading ...
Loading ...