Loading ...
Loading ...
Loading ...
Before using for the first time
19
4. Commissioning TwinDos
The UltraPhase1 and UltraPhase2
values are pre-set in the standard
settings and only need to be confirmed.
The following message appears in the
display:
TwinDos
Confirm with OK.
The following message appears in the
display:
Set now
To set up TwinDos now: Touch the
OK sensor button.
To postpone setup until later: Touch
the sensor button until the
following appears in the display: Set
up later and press the OK button to
confirm.
Determining the water hardness
Water hardness is an indication of the
amount of minerals dissolved in water.
The more minerals in the water, the
higher the water hardness and more
detergent must be dispensed.
Tip: You can measure the water
hardness yourself using the enclosed
test strip. Alternatively, your local water
authority will be able to tell you the
hardness of water in your area.
Dip the test strip in the water for
approx. 1second. Shake excess
water off the test strip.
After approx. 1minute, and based on
the coloration, you will be able to read
the water hardness from the table
below.
Test strip Hardness range
4green areas Hardness level I
1red area
2red areas Hardness level II
3red areas Hardness level III
4red areas
Loading ...
Loading ...
Loading ...