Loading ...
Loading ...
Loading ...
en
9
Controls
Fig. "
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a setting of +4 °C.
Operating tips
■ After the appliance has been switched
on, it may take several hours until
the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
■ While the refrigeration unit is running,
water droplets or a thin layer of ice
may form at the rear panel of
the refrigerator. This is nothing
unusual. It is not necessary to scrape
off the frost or wipe off the water
droplets. The rear panel defrosts
automatically. The condensation
collects in the drainage channel,
Fig. ., and is conveyed
to the refrigeration unit where it
evaporates.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
■ The refrigeration system may cause
several areas of the freezer shelves
to frost quickly. This does not affect
function or power consumption.
The appliance does not require
defrosting until the entire surface
of the freezer shelf is covered with
more than 5 mm of frost or ice.
1 On/Off button
Serves to switch the whole
appliance on and off.
2 Temperature display refrigerator
compartment
The numbers correspond to the
set refrigerator compartment
temperatures in °C.
3 Display super freezing
Illuminates when super freezing is
on.
4 Refrigerator compartment
temperature selection button
The button sets the temperature
in the refrigerator compartment.
Loading ...
Loading ...
Loading ...