Loading ...
Loading ...
Loading ...
Windshield Wiper Off
This is the normal position of the wiper lever: O.
Intermittent Speed
Rotate the end of the lever upward to the first detent. The wipers will operate at
intermittent speed. When the vehicle's speed increases, the time between the wipes
will decrease.
Low Speed
Rotate the end of the lever upward to the second detent. The wipers will operate at
low speed.
High Speed
Rotate the end of the lever upward to the third detent. The wipers will operate at high
speed.
Manual High Speed/Mist
Push the lever upward from the off position. The wipers will operate at high speed to
clear off road mist or spray from a passing vehicle. This operation will continue until
the lever is released. When the lever is released, the wipers will return to the off
position and automatically shut off.
Front Windshield Washer Operation
Pull the windshield wiper/washer lever toward the steering wheel to activate the
washers. The wipers will activate automatically for three cycles after the lever is
released.
CAUTION!
• Turn the windshield wipers off when driving through an automatic car wash.
Damage to the windshield wipers may result if the wiper control is left in any
position other than off.
• In cold weather, always turn off the wiper switch and allow the wipers to return
to the “Park” position before turning off the engine. If the wiper switch is left on
and the wipers freeze to the windshield, damage to the wiper motor may occur
when the vehicle is restarted.
•
Always remove any buildup of snow that prevents the windshield wiper blades from
returning to the off position. If the windshield wiper control is turned off and the
blades cannot return to the off position, damage to the wiper motor may occur.
NOTE:
For Service Position of the windshield wipers, refer to “Maintenance Procedures” in
the “Maintaining Your Vehicle” section in your Owner’s Manual on the DVD for more
information.
OPERATING YOUR VEHICLE
33
Loading ...
Loading ...
Loading ...