Loading ...
Loading ...
Loading ...
9
Sanitizes dishes and glassware in accordance with
NSF International NSF/ANSI Standard 184 for
Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements of the NSF/ANSI
184 performance standard for soil removal and for
sanitization efficacy. There is no intention, either
directly or indirectly, that all cycles on a NSF/ANSI
184 certified dishwasher meet the NSF/ANSI 184
performance standard for soil removal and for
sanitization efficacy.
The Sani Rinse indicator glows at the end of the
cycle if the Sani Rinse option was successfully
completed. If the indicator does not activate, it
is probably due to the cycle being interrupted.
Sensor
Heavy
Normal
Raises the main
wash
temperature to
135°F (57°C) and
the final rinse
temperature to
156°F (69°C).
0:05 to 1:06 0 to 3.86
(0 to 14.6)
Dries dishes with heat. This option, with the use of
rinse aid, will provide the best drying performance.
Plastic items are less likely to deform when loaded
in the top rack. Use Heat Dry for optimum dry
performance. Turn the Heat Dry option off for air dry.
Sensor
Heavy
Normal
Soak & Clean
Uses heating
element to speed
drying times.
Heat Dry option
defaults to On
when any cycle is
selected, except
for 1-Hour Wash.
0:08 to 0:46 0
Runs dishwasher at a later time. Select a wash
cycle and options. Each time you press the delay
button, it will display the next available delay time.
Press DELAY. Press START/RESUME. Close door
firmly.
NOTES:
■ The dishwasher remembers the last Delay you
selected. To reset the delay time to something
other than what is displayed, continue to press
the Delay button until the desired delay time
is reached.
■ Anytime the door is opened (such as, to add a
dish); START/RESUME must be pressed again
to resume delay countdown.
Available with
any cycle
Delays start of
a cycle up to
24 hours.
0:00 0
Avoids unintended use of dishwasher between cycles or cycle and option changes during a cycle.
To turn on Lock, press and hold SANI RINSE/CONTROL LOCK or DELAY (depending on model) for 3 seconds. Control Lock
light will stay on for a short time, indicating that it is activated and all buttons are disabled. If you press any button while your
dishwasher is locked, light flashes 3 times. Dishwasher door can still be opened/closed while the controls are locked.
To turn off Lock, press and hold SANI RINSE/CONTROL LOCK or DELAY (depending on model) for 3 seconds. Light turns
off.
NOTE: If your model requires you to press and hold DELAY to lock controls, Control Lock LED will be on or off to indicate
whether Control Lock is active or not.
OPTION SELECTIONS
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED TIME
TO CYCLE
ADDED
WATER
GALLONS
(LITERS)
Loading ...
Loading ...
Loading ...