Loading ...
Loading ...
Loading ...
11
Cup shelves
Fold down the extra shelf on the left-
hand or right-hand side of the top rack
to hold additional cups, stemware, or
long items such as utensils and
spatulas.
Fold-Down Tines
The row of tines on the left-
hand and right-hand sides
of the upper, or in the back
of lower rack can be
adjusted to make room
for a variety of dishes.
To adjust the fold-down
tines
1. Grasp the tip of the tine
that is in the tine holder.
2. Gently push the tine out
of the holder.
3. Lay the tines down, toward the center of the rack.
EZ Adjust Tines
Sliding lower-rack tines that
move left or right to fit your
dishes. You can use this
feature to fit larger items like
cereal bowls and others.
Silverware Spray (on some models)
Silverware Spray helps remove stuck-on food. It delivers a
concentrated shower of water to the in-the-door silverware
basket to eliminate rewashing.
EZ-2-Lift™ Top Rack Adjuster (on some models)
You can raise or lower the top rack to
fit tall items in either the top or bottom
rack. Adjusters are located on each
side of the top rack.
To raise or lower the rack with
adjuster 1
Hold the top rack with one hand near
the adjuster and use the other hand to
pull out the top of the adjuster. Raise or
lower the rack to one of the preset
positions.
To raise the rack with adjuster 2
Lift and pull up.
To lower the rack
Lift up and let down.
NOTE: The top rack must
be level.
Removable Top Rack
The removable top rack allows you to wash larger items such
as pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack
from the dishwasher.
To remove the rack
1. To gain access to the
track stops, pull the
upper rack forward
about halfway out of
the tub.
2. To open, flip the track
stop toward the outside
of the tub.
3. After opening both track
stops, pull top rack out
of the rails.
4. Close track stops and
slide the tracks back into
the dishwasher.
To replace the rack
1. Gently pull tracks forward in dishwasher until they stop.
Open track stops.
2. Place the back wheels on each side of the rack into the track
slot and roll them back into the tracks, but do not push the
rack all the way into the tub.
3. Insert front rack wheels on each side of the rack into the
track slots.
4. Slide rack into the dishwasher. The stops will automatically
close when rack enters dishwasher.
Rack adjuster 1
Rack adjuster 2
Loading ...
Loading ...
Loading ...